BMS High Voltage Battery Management System 128S409.6V 125A HV BMS Battery Storage Solution For Stationary ESS UPS
Price:
Negotiable
MOQ:
2 Set
Delivery Time:
15-20 days
Brand:
GCE
Product Description
BMS High Voltage Battery Management System 128S409.6V 125A HV BMS
Advanced battery storage solution for stationary ESS and UPS applications, delivering reliable power management for industrial energy systems.
Brand Introduction
Hunan GCE Technology Co., Ltd is a leading domestic manufacturer specializing in high-voltage rack BMS solutions with over 10 years of dedicated R&D and mass production experience. Our independently-developed RBMS master control systems support a wide DC voltage spectrum covering 120V-600V, perfectly compatible with LiFePO4, NMC, and LTO lithium cells. We deliver customized intelligent battery management hardware for multi-scenario energy storage demands including residential backup power, commercial & industrial ESS, off-grid microgrids, and industrial UPS power supplies.
Core Product Advantages
Three-Tier Distributed Architecture
We employ a mature BMU-RBMS-SBMS three-level control topology:
- Standalone single rack mode: Two-layer structure (BMU + RBMS) for small-capacity energy storage equipment
- Multi-rack parallel system: Add upper-layer SBMS central controller, supporting up to 15 RBMS racks linked simultaneously, scalable for large container energy storage stations
Every battery pack is equipped with independent BMU sampling units to achieve full-cell real-time voltage & temperature monitoring, eliminating blind spots of high-voltage cluster detection.
Comprehensive Safety & Protection Mechanisms
Built-in multi-layer hardware and software protection logic to secure lithium battery clusters:
- Instant short-circuit safeguard: Handles 600V/20KA short-circuit current within 20ms
- Independent pre-charge circuit to suppress inrush current during system power-on
- Full-range charge/discharge cutoff, over-temperature & low-temperature lockout
- Automatic parallel circulation balance control to eliminate current deviation among parallel racks
- 2800VDC reinforced insulation withstand voltage test, leakage current controlled below 1mA within 1 minute, complying with CE IEC62477-1 safety standards
Flexible Communication & Easy System Integration
Rich isolated communication ports reserved for cross-brand device integration:
- CAN bus for internal BMU cascading and SBMS host interconnection
- Dual RS485/CAN shared ports to connect mainstream inverters, PCS and UPS devices
- RJ45 Ethernet interface for direct PC upper-monitor access and remote data viewing
Custom communication protocols are available to match third-party power conversion equipment. The unit stores up to 5,000 fault & operation logs, with expandable SD card slots for long-term historical data archiving.
Modular Expandable & Rack-Mount Design
3U standard 19-inch cabinet installation form, front-side wiring layout for convenient on-site wiring and maintenance:
- Max series cell capacity up to 160 lithium cells, supporting customized series-parallel combinations of LiFePO4 modules
- Optional 3.5-inch embedded HMI touchscreen to display real-time system voltage, current, temperature and alarm codes
- Dual dry contact relay outputs for external prohibition-of-charge/discharge signal linkage
- DC cold start function: The unit draws power directly from battery packs, with 220V AC mains only serving as an automatic power-on/off trigger signal
Complete Technical Parameters
| Item | Spec Details |
|---|---|
| Model Series | RBMS-S/D23-125A (S=standalone, D=multi-rack parallel, built-in 3.5" screen, two-wire system) |
| Rated / Max Operating Current | 100A continuous, peak 125A |
| Selectable DC Voltage Grade | 350V (120-350VDC operating range) / 600V (260-600VDC operating range) |
| Static Power Consumption | ≤15W |
| Current Sampling Precision | ±1%FSR full-scale accuracy |
| Enclosure Protection Class | IP20 indoor use |
| Outer Dimension (W×H×D) | 482 × 132 × 500 mm (3U standard rack) |
| Net Weight | Approx. 16kg |
| Operating Ambient Temp | -20℃ ~ 55℃; continuous current derating required above 55℃ |
| Working Humidity | 5%-75%RH non-condensing |
| Standard Certifications | CE, RoHS, IEC62477-1, EN61000-6-2/4; compliant with GB/T national EMC & safety standards |
| Optional Extra Functions | Insulation resistance detection (for systems ≥300V), embedded HMI display, multi-rack parallel module, dual dry contact signal outputs |
Wide Application Coverage
Our high-voltage RBMS master control systems fit nearly all lithium energy storage scenarios:
- Renewable power storage: Grid-connected photovoltaic power stations, off-grid island solar systems, wind-solar hybrid microgrids
- Backup power equipment: Industrial UPS, data center emergency power, telecom base station standby power
- Commercial & residential storage: Behind-the-meter peak-shaving energy storage, household off-grid battery cabinets
- Industrial power supply: 220V DC industrial power systems, mining site independent power supply, large-scale grid frequency regulation energy storage containers
Factory Supply & After-Sales Support FAQ
Q1: Are you a genuine manufacturer or trading firm?
A: We are an original equipment manufacturer with self-owned production workshop and 10+ years of BMS R&D team. Global customers are warmly welcomed to arrange factory inspection visits.
Q2: Can I get samples for performance testing?
A: Sample orders are acceptable for clients to verify compatibility and quality before bulk procurement.
Q3: What lithium cell chemistries does the RBMS support?
A: Fully compatible with LiFePO4, NMC ternary and LTO lithium titanate batteries, covering mainstream energy storage cell types.
Q4: What's the standard mass order lead time?
A: 15-20 working days after deposit receipt, subject to customized communication protocols and voltage/current parameter adjustments.
Q5: Accepted payment terms?
A: T/T advance payment as primary term; flexible payment solutions can be negotiated for long-term cooperative distributors.
Q6: Official warranty policy
A: 3-year free warranty for RBMS master units; 1-year warranty for matched BMU sampling boards and internal PCB components.
Q7: Is OEM & ODM customization available?
A: Yes. We support custom printing of brand logos, modified communication protocols, adjusted protection threshold parameters and tailored package solutions for distributors.
Q8: What voltage & current ranges can be customized?
A: The full GCE BMS product line covers system DC voltage from 96V up to 864V, with optional rated current specifications ranging from 50A to 500A to satisfy diverse project power demands.
Q9: Inverter compatibility performance?
A: Equipped with universal CAN/RS485 communication protocols, compatible with most mainstream domestic and international inverter & PCS brands. Custom protocol adaptation is free of extra charge for bulk orders.
GCE Brand Promise
Driven by persistent technical iteration and strict full-process quality inspection, GCE Technology delivers stable, safe and highly compatible high-voltage RBMS solutions for the booming global energy storage market. Every unit undergoes complete aging testing before shipment to eliminate hidden faults, helping system integrators and project developers cut after-sales maintenance costs and improve long-term energy storage system stability.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hunan GCE Technology Co.,Ltd
Location
Building B3, 602, Science and Technology New City, Changsha County, Changsha City, Hunan Province
Contact Person
Jeffrey