RLK132 Lock Nut Bearing Standard Shaft Locking Device

Products Features

Locking Assembly is a new type of connection. It relies on tightening high-strength bolts to generate positive pressure between the Locking assembly and the shaft or between the housing surface, which is accompanied by friction and a keyless connection device that realizes load transmission. It has many unique advantages and characteristics compared with the traditional mechanical connection method of general interference without bond and bond

Protection instructions

1. After installation, coat the exposed end face of locking assembly and bolt head with anti rust oil stain. For machines operating in the open air or with poor working environment, the exposed end face of the expansion connecting sleeve shall be coated with anti rust oil regularly.

2. For the locking assembly that needs to work in corrosive medium, special protection (such as adding cover plate) shall be adopted to prevent the locking assembly from rusting

Safety precautions and reuse

1. If this product is used on lifting machinery or loaded on machinery, safety devices should be set to ensure safety.

2. It is absolutely forbidden to loosen the bolts under load.

During reuse, the locking assembly can be used only after it is confirmed that there is no dirt, corrosion and damage. The grade is 12.9

Products Parameters