1000BASE-DWDM 1.25Gbps 80km C17-C61 1528.77nm-1563.86nm 100GHz SFP Transceiver Module SMF DOM Duplex LC

Description

The GIGAOPTO's GTS-D1712-80DC series optical transceivers are Dense Wavelength-Division Multiplexing small form-factor pluggable (SFP) modules for 1000BASE-ZX long reach Gigabit Ethernet per IEEE802.3z and 1G Fiber Channel application. This module is specially designed for C Band DWDM networks. It supports a dual data rate of 1.25Gbps/1.06Gbps and 80km transmission distance with 9/125µm single-mode fiber operating at a nominal DWDM wavelength from 1528.77nm to 1565.50nm.

The DWDM SFP transceiver is with the SFP 20-pin connector to allow hot plug capability. The transmitter section uses a DWDM multiple quantum well EML laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses a high-speed PIN photodiode integrated with a trans-impedance preamplifier (TIA).

The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.

Specification

Notice: When the long reach transceiver is used in short distance transmission, please matched with appropriate

attenuator according to the table.

Ordering Information

Features

• Data rate up to 1.25Gb/s
• Available in all C-Band Wavelengths on the 100GHz DWDM ITU Grid
• SMF links up to 80km
• DWDM DFB laser transmitter and PIN photo-diode
• 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface
• Power consumption<1.5W
• Single 3.3V power supply and TTL logic interface
• Hot-pluggable SFP footprint duplex LC
• Compliant with Class 1 FDA and IEC60825-1 Laser Safety
• Use with DWDM Mux/Demux, combined DWDM solution
• Reduce the cost of leasing or laying fiber
• Operating case temperature: Standard: 0°C~70°C (32 to 158°F), Industrial: -40°C~85°C (-40 to 185°F)
• Compliant with RoHS and Lead-Free

Application

• C Band DWDM networks
• SONET/SDH networks
• Fiber channel over DWDM
• Gigabit Ethernet over DWDM

Compatibility

Gigaopto's optical transceivers are 100% compatible with many famous switch brands and will not cause damage to OEM devices. In order to ensure the quality and compatibility of our products, each product is carefully tested on the corresponding equipment before delivery to customers.
For this (1.25G SFP DWDM 80km) compatibility, please refer to the P/N correspondence table (e.g. C17/1563.86nm). If the brand and part number you are looking for is not listed below, please let us know and we will be delighted to provide you with more details.