SFP+ 10G FC 850nm MMF Fiber Channel Module 300m LC DOM
10GFC SW 850nm 300m Transceiver for Fiber Channel LC DOM
Description
Gigaopto’s GTS-L0895-02DC transceiver features a highly reliable 850nm VCSEL transmitter and PIN photo-detector into duplex LC optical connector.
This hot-pluggable 10GFC SW transceiver supports 1.0625-10.518Gbps data rate and applications such as 10G Fiber Channel (10.52Gbps),8G Fiber Channel (8.5Gbps),4G Fiber Channel (4.25Gbps),2G Fiber Channel (2.125Gbps),1G Fiber Channel (1.0625Gbps).It is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Storage Area Networking(SAN) Applications in Data Centers, Data Center Fiber Channel Interconnections over Backbone, Enterprise Networks SAN Interconnections and other optical links.
It supports DDM/DOM optical diagnostics, which provides real-time monitoring of the transceiver temperature, laser bias current,optical power, received optical power and transceiver supply voltage.
All modules are Class 1 laser products compliant with FDA/CDRH and IEC-60825 standards.
Specification
| Form Factor | SFP+ | Data Rate | 1.0625-10.518 Gbps |
| Wavelength | 850nm | Max Cable Distance | 300m over OM3 or 400m over OM4 |
| Connector | Duplex LC | Media | MMF |
| Transmitter Type | VCSEL 850nm | Receiver Type | PIN |
| TX Power | -6~-1dBm | Receiver Sensitivity | <-11.1dBm |
| Extinction Ratio | >3.5 dB | Overload | > 0.5 dBm |
| Power Budget (dB) | 4.1dB | DDM/DOM | Supported |
| Temperature Range | 0 to 70°C (32 to 158°F) | Warranty | 3 Years |
| OEM/ODM | Supported | Weight | 30gram |
| Protocols | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA | ||
| Supported Applications | 10G Fiber Channel (10.518 Gbps), 8G Fiber Channel (8.5 Gbps), 4G Fiber Channel (4.25 Gbps), 2G Fiber Channel (2.125 Gbps), 1G Fiber Channel (1.0625 Gbps) | ||
Features
- Supports up to 10.518Gbps bit rates
- Hot-pluggable SFP+ footprint
- Compliant with SFP+ MSA and SFF-8472
- 850nm uncooled VCSEL transmitter, PIN photo-detector
- Max link up to 300m on Multimode OM3 fiber or 400m on OM4 MMF
- Duplex LC connector receptacle
- Built-in digital diagnostic functions
- Power dissipation < 1W
- Single +3.3V power supply
- Metal enclosure,for lower EMI
- Operating Case Temperature: Standard 0~70ºC
- RoHS compliant and lead-free
Application
- 10GBASE-SR/10GBASE-SW Ethernet
- 10G Fibre Channel
- 10G Data Center Switches and Routers
- 10G Network interface cards and Fiber Media Converters
- Other Optical Links
Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | ||||
| Transmitter | ||||||||||
| Centre Wavelength | λc | 840 | 850 | 860 | nm | |||||
| Spectral Width(RMS) | Δλ | 0.45 | nm | |||||||
| Side-Mode Suppression Ratio | SMSR | - | - | - | dB | |||||
| Average Output Power | Pout | -6.0 | -1.0 | dBm | 1 | |||||
| Extinction Ratio | ER | 3.5 | dB | |||||||
| Data Input Swing Differential | VIN | 180 | 950 | mV | 2 | |||||
| Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |||||
|
TX Disable |
Disable | 2.0 | Vcc | V | ||||||
| Enable | 0 | 0.8 | V | |||||||
|
TX Fault |
Fault | 2.0 | Vcc | V | ||||||
| Normal | 0 | 0.8 | V | |||||||
| Receiver | ||||||||||
| Centre Wavelength | λc | 840 | 850 | 860 | nm | |||||
| Receiver Sensitivity | -10.0 | dBm | 3 | |||||||
| Receiver Overload | 0.5 | dBm | 3 | |||||||
| LOS De-Assert | LOSD | -12 | dBm | |||||||
| LOS Assert | LOSA | -22 | dBm | |||||||
| LOS Hysteresis | 0.5 | 4 | dB | |||||||
| Data Output Swing Differential | Vout | 500 | 700 | 900 | mV | 4 | ||||
|
LOS |
High | 2.0 | Vcc | V | ||||||
| Low | 0.8 | V | ||||||||
Note :
1. The optical power is launched into MMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 231-1 test pattern @10312Mbps, BER ≤1×10-12.
4. Internally AC-coupled.
Compatibility
All Gigaopto’s transceivers are standards-based and MSA (Multi-Source Agreement) compliant, and rigorously tested and coded in our own facilities to ensure the highest level of performance. We conduct 100% application testing under end-use conditions.
For this 10GFC module P/N:GTS-L0895-02DC, please refer to the P/N correspondence table. For more product compatibility, please feel free to tell us.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTS-L0895-02DC | Cisco | DS-SFP-FC10G-SW |
| Juniper | XBR-000218 | ||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.