80m/Min Woodworking CNC Machine MDF Plywood Computer Panel Saw Beam Saw

Features:

1. Automatically detect the sawing length of the board, automatically adjust the sawing time according to the specifications of the cutting board, shorten the running cycle of the machine, and improve the work efficiency;
2. Import processing orders into the system to automatically generate cutting requirements (multiple orders can also be imported for mixed production), and automatically generate cutting documents;
3. The board cutting optimization software automatically optimizes the size of the cutting board, automatically generates a cutting diagram, improves the utilization rate of the board, and automatically imports the optimized data into the cutting saw control system;
4. Automatically feed the board, automatically locate the cutting size according to the cutting requirements, automatically push out the board after cutting one piece and locate the next board size to be cut, continuous cutting, and automatically print barcodes for each cut board Labels, one plate and one label identification, not easy to make mistakes;
5. The feeding is equipped with imported CST planetary reducer and grinding-grade rack and pinion to perform accurate positioning, no need to use magnetic scale for secondary compensation, and the accuracy is directly guaranteed by mechanical hardware;
6. The saw machine runs smoothly on the linear precision guide rail, and automatically moves forward and backward for cutting. The guide rail is installed close to the "U" shape of the body, and the straightness is excellent without adjusting the machine. .
7. The thickness of the steel plate on the table top of the whole machine is 25mm thick, and the body weight is 6 tons. It has been annealed at high temperature by a large heat treatment equipment, which is solid and durable, and then finished by a large CNC gantry milling machine to ensure the quality.

Precautions for operating wood panel sawing machine:

1. Before starting the machine, check whether the saw blade is sharp, whether the clamp handle of the saw blade base and the screws of each component are loose, and adjust it in time;
2. Before starting the machine, clean up the sawdust on the machine table, air trough, etc. in time, and check whether there is any remaining sawdust at the interface of the control box, etc., and clean it up immediately;
3. Workers wear work clothes, work gloves and protective glasses when working;
4. During the feeding process, the board must be close to the machine ruler and pushed into the manipulator;
5. Do not stand in the cutting direction to prevent sawdust from flying out and hurting people. When discharging, workers should ensure a safe distance from the discharge port;
6. When a fault occurs, the power supply should be cut off immediately and the operation should be stopped, and repaired and maintained by professionals;
7. Cut off the power supply in time after the stop work, and clean and lubricate the equipment.