Cisco GLC-BX80-UA 1.25G BIDI SFP 1490nm 1550nm 80km SMF Simplex LC Transceiver

Description Of Fiber Optic Transceiver

Modern network widely chooses optical fiber for long-distance connection. However, the limited fiber resources and high infrastructure investment restrict the network development of some undeveloped regions.  To save fiber resources, many operators favor the application of bidirectional optical transceivers which only use single-core rather than dual-core fiber for optical transmission. The BIDI transceivers can cut half of the new fiber investment and offer double bandwidth with the existing fiber resources. The BIDI transceivers can serve as the low cost solution against the traditional duplex transceivers for Metro, Long haul network configuration.

TBD-1.25G-80A/80B is a bidirectional Hot-pluggable SFP Form optical transceiver. TBD-1.25G-80A/80B features the BIDI wavelength of 1490nm and 1550nm to offer the max transmission of 80km via G.652 Singlemode Fiber. TBD-1.25G-80A/80B features a Simplex LC connector and is fully compliant with BIDI SFP MSA. TBD-1.25G-80A/80B can guarantee compatible with Cisco Catalyst and Nexus switches and Routers to replace Cisco GLC-BX80-UA GLC-BX80-DA for 1000BASE-ZX application.

Specification Of Fiber Optic Transceiver

Feature Of Fiber Optic Transceiver

• Dual data-rate of 1.25Gbps/1.063Gbps operation

• 1550nm DFB laser and PIN photo detector for 80km transmission

• 1490nm DFB laser and PIN photo detector for 80km transmission

• BIDI LC/UPC type pluggable optical interface

• Compliant with SFP MSA and SFF-8472 with simplex LC receptacle

• RoHS compliant and lead-free

• Single +3.3V power supply

• Support Digital Diagnostic Monitoring interface

• Case operating temperature Commercial: 0°C to +70°C

Application of Fiber Optic Transceiver

• Gigabit Ethernet 

• Enterprise, Data Center, Security Network

​

SFP Transceiver List 

FAQ

• Can I use your 1.25G Singlemode SFP with other brand SFP?

          Yes, It can interoperate with other 1.25G Singlemode BIDI SFP

• What's your optic warranty terms?

​         

          1 year free replace, 3 years free repairment for non-human made hardware defects      

• What if I find your optics are not satifiying with our fiber link, occurs critical signal losses?

Our optics are made up of fresh new components through strict QC control on digital & optical parameters, performance and reliability tests through error detectors, eye diagrams and Industrial ovens. The qualification ratio is over 99.9%. If any quality defects occurs within the warranty, we will arrange the replace/repair service immediately.