Transparent Shell (1*1)

No.19014-B

This mold is built on a standard GCI3540.90120100 mold base and follows the LKM mold

standard. It has a length of 400mm, a width of 400mm, and a height of 386mm. Additionally,

the mold features slide and 8 lifters, and uses a side gate (the pin point gate turns to the

side gate). This is a two-plate mold, which means that it has two main plates that separate

to release the molded part.

The cold runner system in its design minimizes gate marks, while the surface is mirror EDM with

VDI 10# to achieve high glossiness and low roughness. As a result, the molded part is free of

sticking.

The core, sub-inserts, movable inserts, ejector rod, and sprue bush are manufactured using steel

with a hardness greater than 40HRC, which undergoes a surface hardening process. This results

in a mold with high hardness and excellent anti-wear performance, with a tool life of up to 500K

shots and stable cavity pressure. The molded part has uniform thickness, a smooth surface, and

clear details, without any gas marks, bubbles, or flow marks.The part material is PC, with the size

of 130.92 X 165.60 X 62.06mm, and the weight of 10g

Display diagram