Stainless Steel 192L 40KHz Industrial Ultrasonic Cleaner For Plastic Mold Injection Mold Die Casting Mold
Specifications:
| Model name | F-480 |
| Internal tank size | 700*550*500mm |
| Application | Clean Spray Flannel Mold |
| Function | Removing dirts, oil, rust, grease |
| Feature | No damage to precision mold |
| Tank capacity | 192L |
| Ultrasonic power | 2400W |
| Heating power | 6000W |
| Time control | 0~99 minutes |
| Temperature control | 20~95℃ |
| Water inlet / outlet | Yes |
| Voltage | 220V / 110V |
Same models with different capacity
| Model | capacity | tank size(mm) | Ultrasonic power |
| F-120ST | 38L | 500*300*250 | 600W |
| F-120 | 45L | 500*300*300 | 700W |
| F-180 | 53L | 500X350X300 | 900W |
| F-240 | 77L | 550X400X350 | 1200W |
| F-300 | 99L | 550X450X400 | 1500W |
| F-301 | 96L | 800X300X400 | 1500W |
| F-360 | 135L | 600X500X450 | 1800W |
| F-480 | 175L | 700X500X500 | 2400W |
| F-600 | 264L | 800X600X550 | 3000W |
| F-720 | 360L | 1000*600*600 | 3600W |
Application:
-Scientific Labs:Eyeglass Frames;Lab Glassware;Optical&Contact Lenses;Pipettesscientific Instruments;Test tubes
-Industrial Manufacturing:Assemblies;Gears;Metal&Plastic Parts;Precision Bearings
-Electronic manufacturing:Capacitors;Ceramic Substrates;PC Boards;Packaging Components;Quartz Crystals
-Medical and Dental Lab:Burs;Blood Oxygenators;Dental Instruments;Syringe Parts;Surgical Instruments
-Jewelry Manufacturing:Chains;Charms;Coins;Intricate Settings;Precious Metals&Gemstones;Watches
If your company has other needs, you can choose the size that suits you according to the chart bel
Benefits of cleaning jewelry with an ultrasonic cleaner
- The process reaches parts of the jewelry that are extremely difficult to clean with traditional cleaning methods.
- Jewelry gets completely clean, leaving it looking brand new.
- No need to disassemble the jewelry.
- Multiple pieces can be cleaned at once, saving time and money. Follow manufacturer recommendations for maximum pieces in your ultrasonic cleaner.
- Gentle cleaning does not damage delicate pieces and allows for cleaning as often as necessary.
Steps to cleaning jewelry with an ultrasonic cleaner
- Fill chamber with cleaning solvent
- Note that water must be hot. Ideally, you would use an ultrasonic cleaner with a heater.
- Run a pre-cleaning cycle
- Submerge jewelry into cleaning solvent
- Run the cleaning cycle
- After the cycle is complete, remove the items from the parts basket and rinse the solution from the items
- After rinsing brush the pieces with a soft-bristled brush. Paying special attention to brushing around the claws and crowns that hold the gemstones or diamonds in place.