ZT103Y Diving first class head Yoke interface balanced diaphragm type

Regulator First stages ZT103Y

Descriptions

Solid and reliable brass chrome plated material with adjustable external relative medium pressure

Balanced diaphragm type, internal diaphragm seal design, can reduce the instant medium pressure drop caused by inspiratory

Medium and high pressure ports are arranged on a shaft parallel to the air inlet to facilitate hose routing

With frost resistance, can be used in cold water environment

Detachable orifice for easier maintenance and longer regulator life

Larger, more efficient tapered filter allows easy fixing of valve to cylinder

EN250/2016 standard

Specifications

A.1 Composition of Air
A regulator uses a natural gas that conforms to the standard and is naturally pure. If the grade of the cylinder is not specified, it must not be worse than normal air and must not contain impurities.
Buy a way to use air that doesn't smell too much gas or have oil in the gas.
Unconsciously Note: The standard for oil and gas smell cannot exceed 0.3mg/m3.
Either the gas or the water content in the cylinder that comes out of the compressor can't exceed 30 mg/m3 at 300 bar pressure or 50 mg/m3 at 200 bar pressure.
Air compressor breathing equipment and pipes must have filtration or water reduction devices to prevent internal icing. These should be paid special attention to