Plastic PC PETG PEEK Desiccant Honeycomb Drying Dehumidifying Hopper Dryer ODD-H

Plastic Dryer, Dehumidifier, Dehumidifying Dryer, Industrial Dehumidifier, Industrial Dryer, Dry Air Dryer, Hot Air Dryer, Drying Machine

NAMING PRINCIPLE of Desiccant Dryer for Plastic Resin

ODD-xxx/xxxH

①        ②     ③

① Orste Dehumidifying Dryer

② Hopper Capacity (L)

③ Dehumidifying Air Quantity (m³/hr), H: Honeycomb

FEATURES of Desiccant Dryer for Plastic Resin

1.         The ODD dehumidifying dryers use honeycomb dehumidifiers with an elegant semi-integral appearance.

2.         Combines the two functions of dehumidifying and drying into one machine, occupy little space which ensures the whole arrange of the workshop.

3.         Insulated drying hopper features dry air down-blowing and cyclone exhaust design. This improves drying efficiency and reduces energy consumption while maintaining a steady drying effect.

4.         Compact in size for ease of movement.

5.         Microprocessor is standard equipment, ensures convenient operation.

FUNCTIONAL SCHEME of Desiccant Dryer for Plastic Resin

The sealed honeycomb rotor is divided into dehumidifying, regenerative and cooling zones in the rotary dehumidifier. Damp and hot air from dry material hopper is blown into rotor after cooled. Moisture from the air is absorbed by rotor and is then absorbed by regeneration heating air. Two strands of airflow function on the rotor. And with the rotation of the rotor, moisture from the air is absorbed and expelled after absorbed regeneration air to form stable low dew-point air, which is dries to the drying temperature and then is blown into drying hopper to closed circle to dry material.

PARAMETERS of Desiccant Dryer for Plastic Resin

Application Cases of Desiccant Dryer for Plastic Resin

Matters Needing Attention

Electrical installation of the machine should be done by qualified electricians.

Connecting the cooling water (if needed) after the machine is installed in a appointing place, make sure the inlet and outlet water pipe is in good condition.

Before connecting to AC Power Source, turn power switch to OFF position. While AC power source is connected, make sure specifications and overload protection rating of the power switch are suitable and reliable. When the machine is under care or maintenance, turn off both power switch and automatic operation switch.