RoHS REACH VN09 V18029 Clip-on Ferrite Core 6mm, High Performance EMI Absorbing Magnetic Core for Industrial Electronic Devices
Price:
USD0.4
MOQ:
405
Delivery Time:
7days
Brand:
Weiaipu
Product Description
RoHS REACH VN09 V18029 Clip-on Ferrite Core 6mm, High Performance EMI Absorbing Magnetic Core for Industrial Electronic Devices
Product Overview
V18029 Anti-Interference Snap-on Ferrite Core 6mm ID
VIIP V18029 split clamp-style ferrite core is purpose-built for on-site EMC troubleshooting and noise suppression on pre-routed cables. Unlike solid toroidal cores requiring cable threading, this split ferrite design clamps directly onto finished wiring without cable disassembly or re-termination.
Characterized by proven broadband impedance performance across 1-500 MHz, this core delivers minimum impedance of 85 Ω at 25 MHz and 165Ω at 100 MHz. It serves as a practical corrective component for projects facing unexpected high-frequency conducted and radiated interference, fully compliant with RoHS and REACH environmental requirements.
Key Features
- Strict quality gate for outward appearance, screening flawed units with surface fissures and edge damages to secure long‑term reliability for end equipment
- Effectively dampens common‑mode high‑frequency interference coupled onto power supply lines and signal transmission harnesses
- Batch‑wise sample evaluation is performed in‑house, verifying impedance performance throughout the full 1‑500 MHz test bandwidth
- Improved structural toughness maintains complete geometry under rough handling, avoiding physical damage in shipment and on‑site assembly
- Clamp‑in place design enables hassle‑free fitting onto finished cables; no wire processing required to shorten overall assembly cycle and lower labour overhead
Specifications
| Model | V18029 |
| Material | Nickel-Zinc Soft Ferrite, Split-clamp type |
| Dimension A (Outer Diameter) | 17.8 mm, ±1.0 mm |
| Dimension B | 16.8 mm, ±1.0 mm |
| Dimension C (Inner Bore ID) | 6.0 mm, ±1.0 mm |
| Dimension D | 36.6 mm, ±1.0 mm |
| Dimension E | 3.0 mm, ±1.0 mm |
| Min. Impedance | 85 Ω @ 25 MHz；165 Ω @ 100 MHz |
| Test Equipment | E4991A |
| Test Frequency Range | 1-500 MHz |
| Compliance | RoHS, REACH |
Applications
- High‑frequency interference attenuation for servo feedback encoder cables within automated production lines
- Common‑mode noise filtering for onboard wiring of commercial display and digital signage equipment
- EMI suppression for communication cabling used in environmental monitoring and weather‑sensing devices
- Noise conditioning for interconnection wires of battery management peripheral auxiliary circuits
- High‑frequency noise elimination for peripheral harnesses of office industrial printing hardware
- Interference mitigation for signal lines of smart transportation roadside sensing terminals
- EMC tuning for external connection cables of portable industrial inspection instruments
Product Images
Frequently Asked Questions
Can I get free samples for ferrite rings and clamps?
Yes, we can provide free samples for our ferrite rings and clamps.
What is your regular order requirement for ferrite rings & clamps?
Normally orders shall follow our minimum package quantity. Exceptions are acceptable for your first trial order.
Does the free-sample policy mean I can place small-quantity orders below MOQ for all orders?
Free samples are for performance verification only. Except for your first order, formal repeat orders need to follow our minimum package quantity requirement.
What certificates do your ferrite cores and clamp-on ferrites have? Can you provide approval sheets?
Our ferrite & clamp-on ferrite comply with RoHS and REACH. We can provide PDF approval sheets (specification document) for your project review.
What is the typical production lead-time for ferrite and clamp-on ferrite mass orders?
Production lead-time is typically 2-5 weeks, depending on order quantity and stock availability. The exact lead-time will be confirmed prior to placing a formal order.
Can you customize impedance/size for ferrite cores and clamp-on ferrites?
Custom service is available upon your technical requirement, MOQ for customized items will apply.
Are clamp-on ferrite rings reusable after installation?
Yes, the snap-on design allows for easy removal and reinstallation, making them reusable.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen VIIP Electronics Co., Ltd.
Location
Room 1301, Block B, Rongchao New Times Plaza, Guanlan High-Tech Industrial Park, Longhua District, Shenzhen. China
Contact Person
Vicky Lee