201 Stainless Steel Pipe Tube Duplex 2205 BA Pickling With Free Sample
Duplex 2205 Stainless Steel Pipe Stainless Steel Tube Square Round Pipe with free sample
The Manfacturing Process of Stainless Steel Tubing
- Cold Rolling is a preferred production process for high precision seamless tubing. Most of our stainless steel tubing and mechanical tubes are made by cold rolling. This technique provides a high forming rate, narrow tolerances and good turnouts. Now the biggest diameter we can get is 219 mm for this process.
- Cold drawing is the general process for our stainless steel tube and pipe. seamless pipe and tubes from this process can be got a a very narrow tolerance ranges, and keep the chemical element well. Additionally, the cold drawing process is the perfect choice for situations which place high requirements on the quality of the surface structure.
| Material Supply | ||||||||||||
ASTM/ASME Grade |
EN Grade |
Chemical Component % | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Other | ||
| 201 | ≤0.15 | 16.00-18.00 | 3.50-5.50 | 5.50－7.50 | ≤0.060 | ≤0.030 | - | ≤1.00 | - | ≤0.25 | - | |
| 304 | 1.4301 | ≤0.08 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - |
| 304L | 1.4307 | ≤0.030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - |
| 304H | 1.4948 | 0.04~0.10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - |
| 309S | 1.4828 | ≤0.08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - |
| 309H | 0.04~0.10 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - | |
| 310S | 1.4842 | ≤0.08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.5 | - | - | - |
| 310H | 1.4821 | 0.04~0.10 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.5 | - | - | - |
| 316 | 1.4401 | ≤0.08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤0.75 | - | - | - |
| 316L | 1.4404 | ≤0.030 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤0.75 | - | - | - |
| 316H | 0.04~0.10 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤0.75 | - | 0.10-0.22 | - | |
| 316Ti | 1.4571 | ≤0.08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤0.75 | - | - | Ti5(C+N)~0.7 |
| 317L | 1.4438 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤0.75 | - | 0.1 | - |
| 321 | 1.4541 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | 0.1 | Ti5(C+N)~0.7 |
| 321H | 1.494 | 0.04~0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | 0.1 | Ti4(C+N)~0.7 |
| 347 | 1.4550 | ≤0.08 | 17.00-19.00 | 9.00-13.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | Nb≥10*C%-1.0 |
| 347H | 1.4942 | 0.04~0.10 | 17.00-19.00 | 9.00-13.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | Nb≥8*C%-1.0 |
| 409 | S40900 | ≤0.03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0.040 | ≤0.020 | - | ≤1.00 | - | 0.03 | Ti6(C+N)-0.5 Nb0.17 |
| 430 | S43000 | ≤0.12 | 16.00-18.00 | 0.75 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
| 436 | S43600 | ≤0.025 | 16.00-19.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | 0.75-1.0 | ≤1.00 | ≤0.025 | Nb+Ti:8(C+N)~0.80 | |
| 439 | S43035 | ≤0.030 | 17.50-18.50 | - | ≤1.00 | ≤0.040 | ≤0.015 | - | ≤1.00 | - | ≤0.030 | Ti+Nb:0.2+4C~0.75 |
| 441 | S44100 | ≤0.030 | 17.50-18.50 | - | ≤1.00 | ≤0.040 | ≤0.015 | - | ≤1.00 | - | ≤0.030 | Ti:0.1-0.6 Nb:3C+0.3~1.0 |
| 446 | S44600 | ≤0.2 | 23.0-27.0 | 0.75 | ≤1.50 | ≤0.040 | ≤0.030 | - | ≤1.00 | 0.25 | ||
| 410 | 1Cr13 | 0.08~0.15 | 11.50-13.50 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
| 420 | 2Cr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
| 440C | 11Cr17 | 0.95-1.20 | 16.00-18.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | 0.75 | ≤1.00 | - | - | - |
| 17-4PH | 630/1.4542 | ≤0.07 | 15.50-17.50 | 3.00-5.00 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | 3.00-5.00 | - | Nb+Ta:0.15-0.45 |
| 17-7PH | 631 | ≤0.09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | Al 0.75-1.50 |
| Packing: | |
| With plastic cap to protect both ends | |
| Plastic bag wrapped outside pipe | |
| Woven bag wrapped outside pipe | |
| All our products are packed, stored, transported according to the international regulation. | |
| The tubes are wrapped with anti-rust paper and steel rings to prevent damage. Identification labels are tagged according to standard specification or customer's instructions. Special packing is available as per customer's requirement. | |
| Plus, ply wooden box are available for special protection. Other kinds of packing can be offered if request. | |
FAQ
Q: Are you trading company or manufacturer ?
A: We are professional manufacturer with 20 years' experience, and our company also is a very professional a trade company for steel products.We can also provide a wide range of steel products.
Q: Will you delivery the goods on time?
A: Yes,we promise to deliver on time,indemnity clause in contract terms will work if we couldn't.
Q: Do you provide samples ? Is it free or extra ?
A: The samples are free,you just need to pay the courier freight.
Q: Do you accept the third party inspection?
A: Yes, absolutely we accept.
Q: How could you guarantee your products?
A: Products are manufactured by certified workshops, inspected by professional inspector. We also issue the warranty MTC to guarantee the quality.
Q: How do we trust your company?
A: We specialise in steel business for many years, authenticated by SGS,welcome to visit our factory.
Q: What's your advantages?
A: Our own prodution lines make the good prices and high quality possible and seasoned workers serve you 7*24hours.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.