1Cr13 100mm Stainless Steel Pipe Tube Hot Rolled DIN 10mm ASTM
410 Stainless Steel Square Round Pipe Tube SS Fabrication Pipe 10mm 100mm Diameter manufacturer
| Material Supply | ||||||||||||
ASTM/ASME Grade |
EN Grade |
Chemical Component % | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Other | ||
| 201 | ≤0.15 | 16.00-18.00 | 3.50-5.50 | 5.50－7.50 | ≤0.060 | ≤0.030 | - | ≤1.00 | - | ≤0.25 | - | |
| 304 | 1.4301 | ≤0.08 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - |
| 304L | 1.4307 | ≤0.030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - |
| 304H | 1.4948 | 0.04~0.10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - |
| 309S | 1.4828 | ≤0.08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - |
| 309H | 0.04~0.10 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | - | |
| 310S | 1.4842 | ≤0.08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.5 | - | - | - |
| 310H | 1.4821 | 0.04~0.10 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.5 | - | - | - |
| 316 | 1.4401 | ≤0.08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤0.75 | - | - | - |
| 316L | 1.4404 | ≤0.030 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤0.75 | - | - | - |
| 316H | 0.04~0.10 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤0.75 | - | 0.10-0.22 | - | |
| 316Ti | 1.4571 | ≤0.08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤0.75 | - | - | Ti5(C+N)~0.7 |
| 317L | 1.4438 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤0.75 | - | 0.1 | - |
| 321 | 1.4541 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | 0.1 | Ti5(C+N)~0.7 |
| 321H | 1.494 | 0.04~0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | 0.1 | Ti4(C+N)~0.7 |
| 347 | 1.4550 | ≤0.08 | 17.00-19.00 | 9.00-13.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | Nb≥10*C%-1.0 |
| 347H | 1.4942 | 0.04~0.10 | 17.00-19.00 | 9.00-13.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤0.75 | - | - | Nb≥8*C%-1.0 |
| 409 | S40900 | ≤0.03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0.040 | ≤0.020 | - | ≤1.00 | - | 0.03 | Ti6(C+N)-0.5 Nb0.17 |
| 430 | S43000 | ≤0.12 | 16.00-18.00 | 0.75 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
| 436 | S43600 | ≤0.025 | 16.00-19.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | 0.75-1.0 | ≤1.00 | ≤0.025 | Nb+Ti:8(C+N)~0.80 | |
| 439 | S43035 | ≤0.030 | 17.50-18.50 | - | ≤1.00 | ≤0.040 | ≤0.015 | - | ≤1.00 | - | ≤0.030 | Ti+Nb:0.2+4C~0.75 |
| 441 | S44100 | ≤0.030 | 17.50-18.50 | - | ≤1.00 | ≤0.040 | ≤0.015 | - | ≤1.00 | - | ≤0.030 | Ti:0.1-0.6 Nb:3C+0.3~1.0 |
| 446 | S44600 | ≤0.2 | 23.0-27.0 | 0.75 | ≤1.50 | ≤0.040 | ≤0.030 | - | ≤1.00 | 0.25 | ||
| 410 | 1Cr13 | 0.08~0.15 | 11.50-13.50 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
| 420 | 2Cr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
| 440C | 11Cr17 | 0.95-1.20 | 16.00-18.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | 0.75 | ≤1.00 | - | - | - |
| 17-4PH | 630/1.4542 | ≤0.07 | 15.50-17.50 | 3.00-5.00 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | 3.00-5.00 | - | Nb+Ta:0.15-0.45 |
| 17-7PH | 631 | ≤0.09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | Al 0.75-1.50 |
| Packing: | |
| With plastic cap to protect both ends | |
| Plastic bag wrapped outside pipe | |
| Woven bag wrapped outside pipe | |
| All our products are packed, stored, transported according to the international regulation. | |
| The tubes are wrapped with anti-rust paper and steel rings to prevent damage. Identification labels are tagged according to standard specification or customer's instructions. Special packing is available as per customer's requirement. | |
| Plus, ply wooden box are available for special protection. Other kinds of packing can be offered if request. | |
FAQ
Q: Are you trading company or manufacturer ?
A: We are professional manufacturer with 20 years' experience, and our company also is a very professional a trade company for steel products.We can also provide a wide range of steel products.
Q: Will you delivery the goods on time?
A: Yes,we promise to deliver on time,indemnity clause in contract terms will work if we couldn't.
Q: Do you provide samples ? Is it free or extra ?
A: The samples are free,you just need to pay the courier freight.
Q: Do you accept the third party inspection?
A: Yes, absolutely we accept.
Q: How could you guarantee your products?
A: Products are manufactured by certified workshops, inspected by professional inspector. We also issue the warranty MTC to guarantee the quality.
Q: How do we trust your company?
A: We specialise in steel business for many years, authenticated by SGS,welcome to visit our factory.
Q: What's your advantages?
A: Our own prodution lines make the good prices and high quality possible and seasoned workers serve you 7*24hours.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.