DP Laser Control System FSCUT 2000S Cypcut CE SGS 10 KG
FSCUT 2000S Cypcut Fiber Laser Cutting Machine Laser Control System
Basic introduction
FSCUT2000S medium power laser cutting system is a full-featured open-loop control system specially designed for the sheet metal processing industry. It is easy to install, easy to debug, has excellent performance and complete solutions. It is an upgraded version of the FSCUT2000 system.
Feature
1. Craft
Supports five levels of perforation, any combination of segmented or progressive
Support the communication control of most mainstream lasers on the market
Support basic processes such as flying cutting, leapfrog, compensation, lead wire, micro-connection, pre-piercing, and film cutting
Support capacitor edge seeking, photoelectric edge seeking, electric focusing, double exchange table, automatic layout, tube cutting, power-off memory, QR code, cutting line, maintenance and other advanced functions
Support advanced processes such as cooling point, sharp corner girth, release corner, etc.
Support pre-opening, gas flushing
Support starting, closing and fine cutting processes
Support air-moving obstacle avoidance, leapfrog intelligent judgment
Supports automation applications such as simple scheduling, virtual multi-station, and scanning code
2. Control
Open-loop control system, the third-generation motion control algorithm of Bochu
Track accuracy 0.03mm, positioning accuracy 0.001mm, repeat positioning accuracy 0.003mm
The maximum cutting speed is 80m/min, and the maximum air moving speed is 150m/min
Maximum acceleration 1.5G
Support dual drive error detection function
Applicable Industries
Suitable for 1500W~6000W medium power fiber laser cutting machine, widely used in sheet metal parts, kitchen utensils, lamps, cabinets and other industries.
 |
| FSCUT 2000S |
Specification
| Adaptation software | CypOne Laser Cutting Software |
| Control card | BMC2104 |
| Interface Type | PCIe bus, x16 interface, 250MB/s |
| Terminal board | BCL3766 |
| Power Requirements | 24V DC/2A |
| Motor control signal | X/Y1/Y2/W axis pulse output, maximum frequency 3MHz X/Y1/Y2 axis with encoder input interface, the highest sampling frequency is 10MHz The W axis can control the rotary axis or the motorized focusing module |
| Dedicated output | 2-channel DA: 0~10V, 50mA 1 channel PWM: 5V/24V optional, accuracy 50KHz (0.1%) |
| Dedicated input | 8-way limit: X/Y1/Y2/W axis positive and negative limit 4-way origin: X/Y1/Y2/W axis origin signal |
| Universal input | 15 channels: the default low level is active, support normally open, normally closed; IN13~IN15 support high and low level switching |
| Universal output | 8 channels: relay output, load capacity 250V AC/5A, 30V DC/5A 12 channels: thyristor output, load capacity DC 24V/500mA |
| Working environment | Temperature: 0~55℃ Humidity 5%~95% (non-condensing) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.