MPX1950 Used Yaskawa Robot For Painting 7kg Payload 1450mm Arm Robots

second hand Industrial robot arm YASKAWA MPX1950 for painting 7kg Payload 1450mm Arm robots

The MPX1950 is a medium-sized painting robot which provides a payload of 7 kg.

The smooth arm design with a large hollow diameter is optimal for tubing and can prevent interferences among paint and air tubes.

Main Specifications:

Model:MXP1950
Maximum reach:1450mm
Maximum payload:7kg
Pose repeatability:± 0.15mm
Number of axes:6
Weight:265kg

KEY BENEFITS
• Payload up to 7 kg for mounting multiple guns and large bells
• Elegant design for optimal tubing and prevention of interferences
• Optimized accuracy
• Pressurized enclosure for explosion protection
– Leakage compensation method to achieve positive pressure
– Requires less air than other air flow methods
• Flexible mounting options
– Floor, wall, ceiling
– Two selectable access points for power cables
(from back and bottom)
• Optimized range of motion
S/L axis designed with no offset for
– Effective use of area under the arm and
– Closer installation of the robot arm to a work piece

Applications:

Painting

More products:

KUKA robot

1: KR 6 R1820 6KG 6axis welding robot

2: KR 6 R700 sixx 6 axis payload 6kg multifunctional industrial robot

3: KR 10 R1420 6 aixs 10kg welding robot

4: KR 210 R2700 EXTRA 210KG payload multifunctional industrial robot

ABB robot

1: IRB 1200/7/0.7 6 axis 7kg payload multifunctional industrial robot

2: IRB 1520ID 6 axis 5kg payload for welding

3: IRB 6700/150/3.2 150 kg payload for handing,cutting and palletizing

Collaborative robot

1: Collaborative robot of Chinese industrial robot arm 6 axis 6kg paylad

2: Collaborative robot of chinese industrial robot arm 7 axis 5kg payload

 

MPX1950 Introduction:

The MOTOMAN MPX1950 painting robot provides a payload of 7 kg, which enables mounting of multiple guns and bells on this medium-sized robot. The smooth arm design with a large hollow diameter is optimal for tubing and can prevent interferences among paint and air tubes. On the U-Axis and L-Arm can be mounted up to 3 kg additionally paint equipment.

Using the leakage compensation method to achieve positive pressure inside the enclosure, less air during operation is required, compared to the conventional air flow method. The MOTOMAN MPX1950 can be mounted on the floor, wall or ceiling and has two selectable access points for power cables. The S/L axis is designed with no offset to enable the effective use of the area under the arm and closer installation to a work piece.

The MOTOMAN MPX1950 is controlled by the high-performance MOTOMAN DX200 controller, which is available with optional Functional Safety Unit (FSU) that offers a wide range of new safety functions.