Collaborative Robot C3 Used EPSON Robot Arm Lightweight 6 Axis CNC Robot Arm

The C3 series was engineered for precision assembly of small parts. These robots were Epson's first 6-axis models to be equipped with Residual Vibration Control, Epson technology that enables Epson robots to move at high speeds with minimal vibration. These robots proved very effective in increasing the efficiency and productivity of users' floor space.

1. Speed and precision
   - Offered excellent production efficiency with a good balance between best-in-class speed and precision1.
   - Standard cycle times in the 0.3-second range2, with repeatability of +/-0.02 mm
2. Slim body
   - High space efficiency
   - The manipulator is only 1/44th the size of its working envelope.
   - An elbow area (joint #3) that is only half the size of that of the previous model, the PS3-AS003.
   - A 42% narrower arm width than on previous models.
   - Less interference with peripherals, walls, and ceiling permits more compact installation
3. Dexterous wrist
   - Compact wrist (joint #5) with wide working envelope4 enables smooth movement and the ability to work from many angles
   - Minimal interference with surroundings improves flexibility in hand design
4. Installation flexibility
   - Can be mounted on a ceiling, wall, floor, tabletop, or at a skewed angle
   - Provides layout freedom and high space efficiency

1 Best at the time the robots were released
2 With a 1-kg payload
3 The radius, from the center of the joint to the edge of the protruding part (figure 1)
4 See figures 2 & 3

Model		ProSix C3
Robot type		6-axis robot
Payload	nominal / max. (kg)	1 / 3 5 kg with special conditions
Horizontal arm length	(mm)	600
Repeatability	(mm)	± 0.02
Motion ranges	J1	± 170˚
	J2	+65˚ / -160˚
	J3	+225˚ / -51˚
	J4	± 200˚
	J5	± 135˚
	J6	± 360˚
Max. speed	J1	450 ˚/s
	J2	450 ˚/s
	J3	514 ˚/s
	J4	720 ˚/s
	J5	553 ˚/s
	J6	553 ˚/s
Inertia	J4 (kg/m2)	0,15
	J5 (kg/m2)	0,15
	J6 (kg/m2)	0,10
Wiring	electrical	D-Sub: 9-pin
	pneumatic	2 x ø 4 mm / 2 x ø 6 mm
Mounting		Floor mount Wall mount Ceiling mount Inclined (angle) Sunk
Environment		standard clean room (ISO3) and ESD
Weight	(kg)	27
Controller	type	RC180 micro controller
	power/signal cable (m)	standard: 3 m option: 5m, 10m, 20m
Standard		Machinery Directive: EN 60204-1 EMC Directive: EN 55011 EMC Directive: EN 60950 RoHS Directive: 2002/92/EC ANSI/RIA R15.06-1999

Collaborative robot C3 robotic arm lightweight 6 axis cnc robot arm packing with fumigation wooden frame

Xiangjing(Shanghai) Mechnical Electrical Tech. Co., Ltd is is the subcompany of Dr. Industry Group Co., Ltd, was founded in January 2015, We focus on discrete industrial automation and process industrial automation, and we can design, develop, install, testing, debug industrial robot, its units and related accessories including fixture, transmission device, positioning device and control system, we can provide Welding Robot, Spray Painting Robot, Transfer Robot, and Grinding Robot, we have many reference in automation industry in China. Meanwhile we are agent of KUKA , ABB, Yaskawa industrial robots, and distributor of FUNC industrial robot. we are the important partner of them in the China market, we have more than 7 engineers with rich expericence, who had been worked for ABB or KUKA more than 10 years. meanwhile Dr. Industry Group can provide ABB and KUKA robot training for our customer, there are weeekly training courses. In the process of industrial automation field, Xiangjing can provide control valve, actuator, postioner, and regulator, Xiangjing is the improtant partner of Emerson process management in the China market, we are fisher and rosemount project authorized agent in China, we can provide fisher control valve, fisher regulator, rosemount pressure, level, thermal transimtter, rosemount wireless instrument, Daniel Flowmeter, ASCO Solenoid Valve, TopWorx Switch and so on. We have many references on power, chemical industry in China. Xiangjing has two teams, one is for discrete industrial automation and the other is for process industrial automation with rich experience, we are good partner of you.

1. who are we?
We are based in Shanghai, China, start from 2015,sell to South America(00.00%),Southeast Asia(00.00%),Eastern Europe(00.00%),Western Europe(00.00%),Domestic Market(00.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Robot,Control Valve

4. why should you buy from us not from other suppliers?
1: We are with ABB,KUKA,FANUC,YASKAWA agentand many other brands agent for years. 2: Majority of our engineer from KUKA, ABB. The engineering manager worked in ABB company for 19 years. 3: We can offer majority of industrial controlled component.

5. what services can we provide?
Accepted Delivery Terms: FOB,EXW；
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,Western Union;
Language Spoken:English,Chinese

1.Multiple Models This series of robots can be used in small parts assembly, dispensing, machine tending, material handling, electronics and many other applications in general industrial fields. 2.Reliable Performance It can adapt to harsh working environment, and can also be equipped with integrated joints which are easy to disassemble and transport. 3.Easy to Maintain Considering that improving maintainability is a key factor to reduce costs, the robot's after-sales and maintenance time is reduced by 15%. 4.Technical Support We will provide you with long-term technical services. If you have any technical problems or other needs during using our robot, you are welcome to contact us.