15V 24V 480W Din Rail Power Supply 90VAC Input EN 62368 Industrial Control
480W AC DC Din Rail Power Supply Industrial Control Power Supply
Descriptions
LIF480-10BxR2isMornsunAC-DCconverterseriesfeaturingacost-efective, energyeficientgrenpowersuplysolutionforstandard DIN-rail mounting.Theproductsoferahighlevelofstabilityandimmunitytonoiseforindustrialcontrolequipment, machinery, andotherindustrial equipmentinavarietyofharshenvironments.TheselightweightAC-DCconvertershaveanextremelycompactdesignandthestandardrail instalation for space saving. With god EMCperformance, compliantwith international IEC/EN/UL/BS EN 62368, UL61010, IS13252(Part1), EN6158standardsforEMCandsafety.
Features
- DIN rail TS-35/7.5 or 15 mountable
- Ultra slim design with 48mm width
- Withstand 305VAC input voltage 5S
- Universal 85- 264VAC or 120- 370VDC Input voltage Accepts AC or DC input (dual-use of same terminal)
- Operating ambient temperature range: -40C to +70C
- The efficiency is up to 94.5%
- High I/O isolation test voltage up to 3000VAC
- DC OK function
- Active PFC, PF > 0.99
- Low ripple & noise
- Output short circuit, over-current, over-voltage, over-temperature protection, input undervoltage protection
- Safety according to IEC/UL62368, EN61558
Specifications
| Selection Guide | ||||||
| Certification | Part No.* | Output Power (W)* |
Nominal Output Voltage and Current (Vo/Io) |
Output Voltage Adjustable Range(V) | Efficiency at 230VAC (%) Typ. |
Max. Capacitive Load (µF) |
| UL/EN/BS | LIF480- 10B24R2 | 480 | 24V/20A | 24-28 | 94.5 | 20000 |
| LIF480- 10B48R2 | 48V/ 10A | 48-55 | 10000 | |||
|
Note: 1. *Use suffix“QQ”for double-faced conformal coating; 2. *Under any conditions, the total power of the product should not exceed the 480W rated power, and the output current cannot exceed the rated output current. |
||||||
| Input Specifications | ||||||
| Item | Operating Conditions | Min. | Typ. | Max. | Unit | |
| Input Voltage Range | AC input | 85 | -- | 264 | VAC | |
| DC input | 120 | -- | 370 | VDC | ||
| Input Voltage Frequency | 47 | -- | 63 | Hz | ||
| Input Current | 1 15VAC | -- | -- | 5 |
A |
|
| 230VAC | -- | -- | 2.5 | |||
| Inrush Current | 1 15VAC | Cold start | -- | -- | 15 | |
| 230VAC | -- | -- | 15 | |||
| Power Factor | 1 15VAC | 0.99 | -- | -- | -- | |
| 230VAC | 0.99 | -- | -- | |||
| Leakage Current | 240VAC | ＜0.8mA | ||||
| Hot Plug | Unavailable | |||||
| Input Undervoltage Protection | Protection start (Input voltage drops from high to low) | -- | 60 | -- | VAC | |
| Protection release (Input voltage rises from low to high) | -- | 75 | -- | |||
| Output Specifications | |||||||
| Item | Operating Conditions | Min. | Typ. | Max. | Unit | ||
| Output Voltage Accuracy | Full load range | -- | ± 1.0 | -- |
% |
||
| Line Regulation | Rated load | -- | ±0.5 | -- | |||
| Load Regulation | 0% - 100% load | -- | ± 1.0 | -- | |||
| Ripple & Noise* |
20MHz bandwidth (peak-to-peak value) |
24V | -- | -- | 50 | V | |
| 48V | -- | -- | 70 | ||||
| Temperature Coefficient | -- | ±0.03 | -- | %/C | |||
| Minimum Load | 0 | -- | -- | % | |||
| Hold-up Time | 16 | 22 | -- | ms | |||
| DC OK Signal | 30VDC/ 1A Max. | ||||||
| Short Circuit Protection | Recovery time 10s after the short circuit disappear. | Hiccup mode, constant current works 1s, turn off 10s, continuous, self-recovery | |||||
| Over-current Protection | 230VAC, rated load | 150% Io (Typ.), the output turned off after working continuously for 1s, self-recovery | |||||
| Over-voltage Protection | 24V | 29-35V (Output voltage hiccup) | |||||
| 48V | 56-60V (Output voltage hiccup) | ||||||
| Over-temperature Protection* | 230VAC, 100% Io | Over-temperature protection start | -- | -- | 90 | C | |
| Over-temperature protection release | 60 | -- | -- | ||||
|
Note: 1. *The“Tip and barrel method”is used for ripple and noise test, output parallel 47uF electrolytic capacitor and 0. 1uF ceramic capacitor, please refer to Enclosed Switching Power Supply Application Notes for specific information; 2. *Over-temperature Protection: Output voltage turn off, self-recovery after the temperature drops. |
|||||||
| Mechanical Specifications | |
| Case Material | Metal (AL1100, SPCC) and Plastic (PC940) |
| Dimensions | 131.50 x 48.00 x 125.00 mm |
| Weight | 980g (Typ.) |
| Cooling Method | Free air convection |
Installation Diagram
Dimensions and Recommended Layout
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.