Eco-Friendly Anti-Yellowing Water-Based Coating for Rattan Furniture – Low VOC, Durable Protection
Price:
USD+100+1L
MOQ:
1000L
Delivery Time:
10 working days for stock, 10-15 days for production
Brand:
HILHELM
Product Description
Eco-Friendly Anti-Yellowing Water-Based Coating for Rattan Furniture – Low VOC, Durable Protection
HILHELM Eco-Friendly Anti-Yellowing Water-Based Coating is engineered to safeguard and beautify woven cane, rush, and rattan furniture. Leveraging modern polyurethane-acrylate dispersion science, this formula delivers robust defense while maintaining the organic texture and soft touch of natural weaving materials.
Core Product Advantages
- Advanced UV Stability: Built-in photoprotective agents block solar degradation, stopping premature discoloration and preserving original pigmentation.
- Zero-Harm Composition: Completely free of hazardous solvents, formaldehyde, free isocyanates, and toxic heavy metals like lead or mercury.
- High Flexibility Matrix: Features a 1mm elasticity index, allowing the protective layer to bend alongside flexible organic strands without fracturing.
- Rapid Turnaround: Achieves surface dryness in 30 minutes, boosting workshop productivity and shortening assembly lines.
Technical Performance Parameters
Lab-tested data. Contact support for specifics.
| Parameter | Value/Result |
|---|---|
| Suitable Materials | Woven cane, rush, and rattan furniture |
| VOC, Formaldehyde | N.D. |
| DBP, BBP, DEHP, DINP, DNOP, DIDP (EN14372:2004, GC-MS) | N.D. |
| Lead, Cadmium, Boron, Barium, Arsenic, Antimony, etc. (Migration Of Certain Elements EN71-3:2019+A2:2024) | PASS |
| Artificial Weathering Resistance | No blistering, no peeling, no cracking, no chalking, and no significant discoloration |
| Scrub Resistance | 10000 cycles |
| Viscosity | 500 cps |
| Spray Viscosity (Iwana #2 Cup) | 20-25 seconds |
| Film Thickness | 15-25 microns per layer |
| Recommended Application Temperature | 10-30°C |
| Minimum Application Temperature | Above 5°C |
| Surface Dry Time | 0.5 hours |
Application Guidelines and Best Practices
- Substrate Preparation: Confirm woodwork is pristine, oil-free, and holds a moisture reading under 75 percent. Refrain from coating during high humidity or chilly spells.
- Blending Protocol: Agitate the liquid thoroughly, strain through a 200-mesh mesh, and dilute with clean moisture if required—keeping total addition under 5 percent.
- Curing Schedule: Wait a minimum of 120 minutes between layers. Sand thoroughly between applications to eliminate glossy patches.
Frequently Asked Questions
Q: How do I properly store leftover coating material after opening the container?
A: Seal the original lid tightly, store it in a cool and shaded environment where temperatures stay between 10 degrees and 30 degrees Celsius, and keep it safely away from strong acids, alkalis, and oxidizers.
Q: Is it safe to apply this waterborne coating over previously painted wooden surfaces?
A: For optimal bonding and clarity, apply directly to bare, clean, and properly sanded natural substrates rather than layering over incompatible old paints.
Q: What equipment should I use for spray application?
A: Conventional pneumatic spray guns or HVLP systems work exceptionally well, provided you adjust the fluid delivery and atomization pressure to match the 20 to 25 second cup viscosity.
Q: What causes pinholes or bubbles during the film formation process?
A: Applying excessively thick single coats or working in environments with high relative humidity typically traps air or moisture, resulting in surface bubbles. Always apply thin, uniform layers.
Q: How can I remove the protective finish from my brushes and spray tools?
A: Clean all application tools thoroughly with warm running water and mild detergent immediately after use before the acrylic resin begins to set.
Q: Does this formulation comply with international safety standards for children's items?
A: Yes, its low-emission, heavy-metal-free, and non-toxic makeup makes it exceptionally safe for everyday consumer goods, including nursery furnishings and toys.
Q: Why must I filter the liquid through a mesh screen before pouring it into my spray gun?
A: Straining catches any micro-particles or minor skin layers that may form over time, preventing nozzle clogging and ensuring a flawlessly smooth spray pattern.
Q: Can I mix different color tints into the clear base?
A: You can use compatible water-based colorants to achieve custom hues, provided you test a small batch first and avoid mixing products sourced from different manufacturers.
Q: Are you a certified manufacturer?
A: Yes. We have over 10 years of specialized experience in water-based coating production and are recognized as a national high-tech enterprise in China. Our long-standing track record and official certifications reflect our commitment to excellence.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Xiamen Jintianran Environmental Protection Technology Co., Ltd.
Location
Xinglin Industrial Zone, Jimei District, Xiamen City, Fujian Province, China
Contact Person
Jintianran