600 Grit Polished 304 Stainless Steel Rectangular Tube 6m Length | VVINSCO
VV VVINSCO • WINSCO METAL decorative stainless steel tube featuring a fine 600-grit polished surface. Six-metre decorative rectangular tubing ideal for railings, partitions, door frames, furniture and commercial interiors. Custom sizes, wall thicknesses, cutting and fabrication available for project orders.
"600G C-304 × 6 Metres" refers to a fine 600-grit polished surface, C-304 refers to grade 304 stainless steel, and 6 metres is the tube length. The number 600 is not the tube diameter. The rectangular width, height and wall thickness must be selected separately from the project drawing.
For an accurate quotation: send the rectangular size, wall thickness, grade, 600G surface reference, length, quantity, tolerance, processing requirement and destination port.
Confirm the tube dimensions and approved surface sample before production.
| Product | TIG-welded decorative stainless steel rectangular tube / stainless steel flat tube |
|---|---|
| Primary Grade | AISI 304 / 304L |
| Alternative Grades | AISI 201 and 316/316L, subject to size, wall thickness, finish and order quantity |
| Featured Surface | 600-grit fine polished finish |
| Other Surface Options | 2B, BA, No.4, brushed, hairline and mirror by agreement |
| Wall Thickness | 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 2.75mm and 3.0mm |
| Standard Length | 6m; 1m, 2.5m, 3m, 5.85m, 6.1m, 7m and custom cut lengths by agreement |
| Reference Standard | ASTM A554; additional project requirements should be confirmed before production |
| Processing | Cutting, drilling, laser cutting, bending review, welding, polishing and end finishing |
| Typical Applications | Railings, balustrades, partitions, door frames, furniture, shopfitting and decorative architectural fabrication |
Important: not every size is available in every grade, wall or finish. Confirm dimensional tolerances, corner radius, weld-bead condition and surface direction with the quotation.
Dimensions are shown in millimetres. This is a capability reference; current tooling, MOQ and producible wall thickness must be confirmed for each requested size.
Use an approved physical sample to control gloss, grain direction and batch appearance.
These are purchasing guidelines, not structural ratings. Span, supports, anchors, joints, welds and design loads must be evaluated for load-bearing applications.
Fine-polished decorative surface.
Rectangular profile and surface reference.
Confirm size, wall, length and finish before production.
Suitable for custom architectural fabrication.
- Cut to specified length
- Drilling and laser cutting
- Bending feasibility review
- Welding and frame fabrication
- Polishing and end finishing
- Grade checked to order requirement
- External dimension and wall checks
- Length, straightness and quantity checks
- Surface, grain and visible weld inspection
- Labels checked against packing list
Protective film or individual plastic sleeves can be selected to reduce handling damage during packing, transport and installation.
Bundles, protective board, woven wrapping, wooden cases or reinforced frames can be arranged according to surface and unloading method.
No. It refers to the 600-grit surface-polishing specification. The rectangular width, height and wall thickness must be stated separately.
No. A 600-grit polished surface and an 8K mirror surface use different finishing targets. Approve a physical sample when gloss and grain are important.
Yes. The featured standard length is 6m. Other standard or custom-cut lengths can be quoted according to the project specification.
Yes. Send a drawing so VVINSCO can review cutting, drilling, laser cutting, bending, welding, polishing and surface protection requirements.
State size, wall, grade, finish, length, quantity, tolerance, corner requirement, weld-bead condition, processing, packing, documents and destination port.
Send VVINSCO your tube schedule or drawing. We will review the producible size, wall, 600G finish, fabrication and packing requirements before preparing the quotation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.