0.4mm 201 2B Stainless Steel Sheet 1500 x 3000mm - Cold Rolled Inox Sheet with Mill Finish
0.4mm 201 2B Stainless Steel Sheet, 1500 x 3000mm
A practical cold-rolled mill-finish sheet for fabricators who need a large-format panel, light gauge and a clean 2B surface for forming, cutting and general fabrication.
Buyer Summary
This listing is built around a 1500 x 3000mm, 0.4mm stainless steel sheet in grade 201 with a 2B mill finish. It is suitable for indoor fabrication, equipment covers, cabinets, panels and decorative components where economical stainless steel and a smooth mill surface are required. Grades 304, 304L, 316 and 316L, other thicknesses and cut sizes can be quoted separately.
Product Specifications
| Product | Cold-rolled 2B stainless steel sheet / inox sheet |
|---|---|
| Featured grade | SS 201 |
| Other available grades | SS 304, 304L, 316 and 316L, subject to order confirmation |
| Featured size | 1500 x 3000mm |
| Regular sizes | 1000 x 2000mm; 1219 x 2438mm (4 x 8 ft); 1219 x 3048mm (4 x 10 ft); 1250 x 2500mm; 1500 x 3000mm; 1500 x 6000mm |
| Featured thickness | 0.4mm |
| Available thickness | 0.3-3.0mm, subject to grade, width and production confirmation |
| Surface | 2B cold-rolled mill finish |
| Processing | Cut-to-size, slitting, bending and protective film options upon request |
| Inspection | Grade, thickness, width, length, surface and packing checked against the confirmed order |
Why Buyers Choose This Sheet
- Large panel coverage: 1500 x 3000mm can reduce joints and offcuts in suitable projects.
- Light-gauge fabrication: 0.4mm material supports economical covers, liners and formed components.
- Consistent 2B appearance: a smooth, low-reflective mill finish suitable for fabrication or further finishing.
- Grade alternatives: select 201 for many indoor uses or request 304/316 where added corrosion resistance is required.
- Order-based production: dimensions, film, processing and packing can be matched to the approved purchase order.
Typical Applications
Equipment enclosures, electrical cabinets, appliance parts, indoor wall panels, door and window components, shower-room parts, skirting, general metalwork and fabricated covers. Suitability depends on grade, thickness, forming method and the actual service environment.
Quality Control Before Shipment
- Verify material grade and order identification.
- Check thickness, width and length against the approved tolerance.
- Inspect the 2B surface for visible handling or processing defects.
- Confirm quantity, protective film requirement, labels and packing.
- Provide order documents or inspection records when agreed in the quotation.
Frequently Asked Questions
Is 0.4mm the actual or nominal thickness?
Please state your required tolerance when requesting a quotation. The confirmed contract thickness and permitted tolerance should appear on the quotation and purchase order.
Can the sheet be cut or bent?
Yes. Cut-to-size and bending can be discussed. Send a drawing with dimensions, bend direction, quantity and acceptable tolerance for technical review.
Is grade 201 suitable outdoors?
It may not be the best choice for humid, coastal or chloride-rich environments. Grade 304 or 316 may be more appropriate, but the buyer should confirm the grade against the actual exposure and local project requirements.
Can protective film be applied?
Protective film options can be quoted. Specify the film type, removal conditions and whether the sheet will undergo laser cutting, bending or other fabrication.
Request an Accurate Quotation
Send: material grade, thickness and tolerance, width x length, 2B surface requirement, protective film, processing drawing, quantity, packing requirement and destination port. VVINSCO will confirm production feasibility before the order is finalized.
Technical values shown are supply options, not a universal guarantee. Final specifications are governed by the approved quotation, sample, drawing, purchase order and applicable standard.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.