30x60mm Stainless Steel Rectangular Tube with 0.5-2.7mm Wall in 201/304/316 Grades | VVINSCO
A versatile TIG-welded stainless steel rectangular tube for railings, balustrades, partitions, door frames, furniture and custom architectural fabrication—available in grades 201, 304 and 316 with 0.5-2.7mm wall thickness.
- External Size: 30*60mm
- Wall Thickness: 0.5-2.7mm
- Material Grades: 201, 304, 316
- Surface Options: Satin, Mirror, Brushed, and more
Choose this profile when your drawing calls for a 30*60mm rectangular section with flat mounting faces, a balanced 1:2 profile and a clean decorative appearance. Light walls suit interior fabrication, while heavier walls provide more local rigidity for frames and railing components.
For a fast quotation: Send the grade, 30*60mm size confirmation, wall thickness, finish, length, quantity, processing requirement and destination port.
| Product | TIG-welded stainless steel rectangular tube / stainless steel flat tube |
|---|---|
| External Size | 30*60mm |
| Approx. Inch Size | 1.181″ * 2.362″; metric dimensions control the order |
| Wall Thickness | 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm and 2.7mm |
| Material Grades | AISI 201, AISI 304 and AISI 316 |
| Reference Standard | ASTM A554; other requirements should be confirmed before quotation |
| Surface Options | 2B, BA, No.4, brushed, satin, hairline and mirror; custom finish by agreement |
| Standard Lengths | 5.85m, 6m, 6.1m and 7m; custom cut length available |
| Processing | Cutting, bending, drilling, laser cutting, welding, polishing and end finishing |
| Typical Uses | Railings, balustrades, partitions, door frames, furniture, screens and decorative fabrication |
| Supply | Factory production with pre-shipment dimensional, surface and quantity inspection |
Light indoor decoration, covers and low-load fabrication where reduced weight and formability are priorities.
Furniture, partitions, door frames and general architectural components requiring a practical balance of rigidity and fabrication.
Frames and railing components requiring greater local rigidity, stronger joints or more material for drilling and welding.
These are purchasing guidelines, not structural ratings. Safe wall thickness depends on span, load direction, supports, anchors, joints, welds and applicable design codes. Ask your engineer to approve load-bearing applications.
Cost-conscious choice for dry indoor decoration and furniture where exposure to moisture and chlorides is limited.
General-purpose choice for furniture, railings, frames and architectural decoration in typical indoor or outdoor conditions.
Preferred for coastal, humid or chloride-exposed environments when enhanced corrosion resistance is required.
Grade selection must consider the actual atmosphere, cleaning chemicals, maintenance and required service life. Send VVINSCO the project location and exposure conditions if you need help comparing grades.
Directional texture that helps reduce the visual impact of handling marks. Specify the grain direction and reference sample for color or texture matching.
High-reflection decorative surface for premium interiors and display work. Protective film and careful handling are recommended.
Mill or bright-annealed base surfaces for further fabrication, polishing or applications where a decorative grain is not required.
Project-specific polishing, color or protection can be reviewed against a physical sample and order quantity.
| Specified Metric Size | 30.0mm * 60.0mm |
|---|---|
| Decimal Inch Conversion | 1.181″ * 2.362″ |
| Nearest Fractional Reference | Approximately 1 3/16″ * 2 3/8″; this is a reference only, not an exact substitute |
| Purchase Instruction | Order by the 30*60mm drawing dimensions and specified tolerance. Do not substitute an inch profile without checking mating parts and fabrication drawings. |
Posts, frames, infill and fabricated railing parts when the complete assembly is engineered for the required load.
Partitions, screens, door frames, façade details and decorative metalwork.
Table and cabinet frames, shelving, retail displays and exhibition structures.
- Cut to specified length
- Bending and forming review
- Drilling and laser cutting
- Welding and assembly support
- Polishing and end finishing
- Grade verification by order requirement
- External dimension and wall checks
- Length, straightness and quantity checks
- Surface and visible weld inspection
- Labels checked against packing list
Export Packing: Bundles, protective board, woven wrapping, wooden cases or reinforced frames can be reviewed according to surface, bundle weight and unloading method.
30*60mm converts to approximately 1.181″ * 2.362″. The nearest fractional reference is about 1 3/16″ * 2 3/8″, but the order should be controlled by the metric drawing dimensions and tolerances.
201 is mainly recommended for dry indoor decorative use, 304 for general architectural and furniture applications, and 316 for coastal, humid or chloride-exposed environments.
Yes. VVINSCO can review cut-to-length, bending, drilling, laser cutting, welding and polishing requirements. Send a drawing so the process, tolerances and visible-surface protection can be confirmed.
Yes. Standard lengths include 5.85m, 6m, 6.1m and 7m, and custom lengths or finishes can be quoted according to the required quantity and process.
State grade, size, wall thickness, finish, length, quantity, tolerance, processing, protective film, packing, required documents and destination port.
We will review manufacturability, confirm the specification and prepare a quotation based on the actual grade, finish, processing, quantity and delivery destination.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.