PYB Series 900 1200 Cone Crusher Equipment, Iron Ore Basalt Small Stone Crusher Machine
PYB series 900 1200 cone crusher equipment, iron ore basalt stone spring cone crushing machine
Product Description
Spring cone crusher is suitable to crush kinds of ores and rocks with medium hardness and above. It has features of reliable structure,high efficiency,high capacity,low operating cost,easy adjustment ,economical to use and so on. Spring system plays the role of overload protection, which will enable the exotic materials or steel piece to pass through the crushing chamber without any damage to the machine. It adopts grease seal to isolate dust and lubricants, therefore ensure its reliable operation. According to customer demand, respectively, using standard type, medium type and short head type for coarse crushing, medium crushing and fine crushing operation.
Working Principle
Spring cone crusher working principle :During operation, the motor of goodpy series spring cone crusher price drives the eccentric shaft shell to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed. To ensure the precision of thrust bearing installation in spring cone crusher, installation must be the following steps: first, the installation of the thrust bearing should be same to steps of scratching; jaw plate placed in a case back should be smooth,if case back has the burr and the remaining sand,please clean up.Then pour lubricating oil to just the top of jaw plate. then install the middle circle plate and circle plate. Finally, install the air eccentric shaft, spherical tile racks, and spindle. When installing air eccentric shaft,the big gear weight should be placed in the top of small gear,so that the outer end of bevel gear is alignment. After spherical wham installed, the gap between spherical bearing seat and the main machine is as big as possible.
Product Overview
Cone crusher is widly used for secondary and fine crushing in the fields of mining,building materials,metallurgy and so on.It can crush materials with middle and high hardness,such as ironstone,copper ore,granite,basalt,cobblestone,marble,limestone and so on.It is popular to be used in the high automatic crushing line which has strict requirement for finished products' shape and ratio.
Features
Three kinds of hydraulic protecting parts(protecting oilcan,locking oilcan and hydraulic driving oilcan)not only protect the machinery,but also deal with troubles without disassembling the parts.Easy operation,reliable performance and adjustable finished products size.The crushing chamber is specially designed according to particles-layer-pressure principle.The special chamber and the suitable rotary speed improve crushing ratio and capacity as well as the cubic product percentage.It is adjusted by hydraulic device and lubricated by diluted oil.The labyrinth seal eliminates the defect of mixture between water and oil in the traditional spring cone crusher.The mantle and cone cave are made by high manganese steel.The special design of crushing cavity and particles-layer-pressure protection decrease the abrasion,making the service time 30%~80% longer than traditional cone crusher.
Specification
spring cone crusher technology specfications:
| Type |
Dia. of Cone (mm) |
Adjusting Range of Discharge Opening (mm) |
Max Feed Size (mm) |
Capacity (t/h) | Motor Power (kw) | Weight (t) |
Overall Dimension (mm) |
| PYB-600 | 600 | 12-25 | 65 | 15-25 | 30 | 5.5 | 1740×1225×1940 |
| PYD-600 | 3-13 | 36 | 5-23 | 30 | 5.5 | 1740×1225×1940 | |
| PYB-900 | 900 | 15-50 | 115 | 50-90 | 55 | 10.18 | 1990×1640×2380 |
| PYZ-900 | 5-20 | 60 | 20-65 | 55 | 10.19 | 1990×1640×2380 | |
| PYD-900 | 3-13 | 40 | 15-50 | 55 | 10.27 | 1990×1640×2380 | |
| PYB-1200 | 1200 | 20-50 | 145 | 110-200 | 110 | 24.7 | 2805×2300×2980 |
| PYZ-1200 | 8-26 | 100 | 50-150 | 110 | 25 | 2805×2300×2980 | |
| PYD-1200 | 3-15 | 50 | 18-105 | 110 | 25.6 | 2805×2300×2980 | |
| PYB-1750 | 1750 | 25-60 | 215 | 280-480 | 155-160 | 50.6 | 3610×2950×4185 |
| PYZ-1750 | 10-30 | 185 | 115-320 | 155-160 | 51 | 3610×2950×4185 | |
| PYD-1750 | 5-15 | 85 | 75-230 | 155-160 | 50.5 | 3610×2950×4185 | |
| PYB-2200 | 2200 | 30-60 | 300 | 590-1000 | 260-280 | 84 | 4790×3430×5080 |
| PYZ-2200 | 10-30 | 235 | 200-580 | 260-280 | 85 | 4790×3430×5080 | |
| PYD-2200 | 5-16 | 110 | 120-370 | 260-280 | 85 | 4790×3430×4852 |
Questions & Answers
1. How long is the delivery time of your product?
The delivery time is within 20 working days.
2. What is the payment term?
The payment term is T/T.
3.How long is the product warranty period?
Our warranty period is 1 year, excluding wearing parts.
4.What's the after sale service of your company?
We will provide foundation drawing to the clients for installation. Besides, we can provide guidance service for installation and operation of workers, etc.
5. Can your company provide wearing parts?
We can deliver you the spare parts within 10 working days after your order. If your equipment are not manufactured by our company, please provide us the wearing parts drawing or number.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.