White EPDM Lined Fire Hose 1'' To 6'' Fire Hose And Nozzle And Coupling
1''To 6'' EPDM Single Jacket Firefighting Hose For Fire Fighting
Specification of EPDM Lined Fire Hose
| Inner Diameter | W.P.(Mpa) | B.P.(Mpa) | |
| Item | Nominal size (mm) | ||
| 1’’ | 25 | 0.8-4.0 | 2.4-12.0 |
| 1.5’’ | 38 | 0.8-4.0 | 2.4-12.0 |
| 2’’ | 51 | 0.8-4.0 | 2.4-12.0 |
| 2.5’’ | 63.5 | 0.8-4.0 | 2.4-12.0 |
| 3’’ | 76 | 0.8-4.0 | 2.4-12.0 |
| 4’’ | 102 | 0.6-2.5 | 1.8-7.5 |
| 5’’ | 127 | 0.6-2.5 | 1.8-7.5 |
| 6’’ | 152 | 0.6-2.5 | 1.8-7.5 |
Application instruction:
1. connect the hose.
When the fire hose is sleeved with the hose interface, it must be padded with a layer of soft protection, and then tied tightly with galvanized iron wire or throat hoop.
2. usage of hose.
When using the fire hose, the high-pressure hose should be connected close to the water pump. The hose filled with water should be prevented from twisting or sudden bending, and the hose interface should be prevented from collision and damage.
3. Water hose laying.
When laying the water belt, it is necessary to avoid sharp objects and various oils. When laying the water belt vertically to a high place, it is necessary to use the water belt hook. When laying the water belt through the traffic artery, it should be padded with a water belt to protect the bridge. When passing the railway, the water belt should pass under the track to prevent the water belt from being crushed by the wheel and interrupted water supply.
Other Recommended Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.