ASTM B164 Monel K500 Alloy Round Bar Black Surface OD 250mm ASTM B164 Nickle Alloy Rod
Monel K500 Alloy Round Bar Black Surface OD250mm ASTM B164 Nickle Alloy Rod
| Product Name | Nickel based bar |
| Material | |
| Monel Alloy | MONEL K-500, Monel400/2.4360, Monel 401. |
| Inconel Alloy | Inconel840 (S33400), Inconel 686 (2.4606-N06686), Inconel725 (NO7725), Inconel713C (2.4671) |
| Inconel625 (2.4856), Inconel602ca (N06625), Inconel601 (2.4851), Inconel600 (2.4816) | |
| Inconel690 (2.4642), Inconel617 (N06617), InconelX-750 (750), Inconel804, Inconel718 (2.4668) | |
| Hastelloy Alloy | Hastelloy AlloyB-2/Hastelloy B-2 Alloy, Hastelloy AlloyB3/Hastelloy B3 Alloy |
| Hastelloy C-2000 Alloy/Hastelloy AlloyC-2000, Hastelloy C-4/Hastelloy AlloyC-4/2. 4610 | |
| Hastelloy C-22/Hastelloy AlloyC22, Hastelloy AlloyC-276/Hastelloy C-276 Alloy | |
| Nickel based series | sheet, coil, bar, pipe. |
| Standard | AISI, ASTM, DIN, GB, JIS, SUS,UNS etc. |
| Diameter | 2mm-400mm or 1/8"-15" or as your request |
| Length | 1 meters to 6 meters or as customer 's requirement |
| Treatment/Technique | Hot rolled, cold drawn, Annealed, Grinding |
| Surface | Polished, colored, embossed,etched, perforated etc. |
| Applications | Decorative /industrial/building material |
| Trade Terms | EXW, FOB, CFR, CIF |
| Delivery time | Shipped in 7-15 days after payment |
| Package | Standard sea-worthy package or as required |
| SEAWORTHY PACKING | 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM |
| 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM | |
MonelK500:
In addition to the excellent mechanical properties such as high strength, corrosion resistance and non-magnetism, Monel K500 alloy also has the same corrosion resistance as Monel 400 alloy. It can be used as pump shaft material, suitable for the harsh geology of high sulfur, high wax oil layer. It is applicable to the stone Oil, chemical, shipbuilding, pharmaceutical and electronic industries.
Monel 400 is a nickel-copper alloy (about 67% Ni - 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric a cid and ammonia systems. Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.Features:
* Resistant to seawater and steam at high temperatures
* Excellent resistance to rapidly flowing brackish water or seawater
* Excellent resistance to stress corrosion cracking in most freshwaters
* Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
* Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
* Excellent resistance to neutral and alkaline salt
* Resistance to chloride induced stress corrosion cracking
* Good mechanical properties from sub-zero temperatures up to 1020° F
* High resistance to alkalis
* Industrial heat exchangers
* Chlorinated solvents
* Crude oil distillation towers
* Chemical and hydrocarbon processing equipment
* Gasoline and freshwater tanks
* Crude petroleum stills
* De-aerating heaters
* Boiler feed water heaters and other heat exchangers
|
Chemical Composition
|
|||||||
|
Grade
|
Ni%
|
Cu%
|
Fe%
|
Mn%
|
C%
|
Si%
|
S%
|
|
Monel 400
|
Min 63
|
28-34
|
Max 2.5
|
Max 2.0
|
Max 0.30
|
Max 0.50
|
Max 0.024
|
|
Monel 400 International Brand
|
||||
|
|
USA
|
GE
|
UK
|
FR
|
|
|
UNS
|
SEW VDIUV
|
BS
|
AFNOR
|
|
Monel 400
|
N04400
|
W.Nr.2.4360 NiCu30Fe
|
NA 12
|
Nu 30
|
|
Physical Properties
|
||
|
Grade
|
Density
|
Melting Point
|
|
Monel 400
|
8.83 g/cm3
|
1300ºC-1390ºC
|
|
Mechanical Properties
|
||||
|
Alloy
|
Tensile Strength
(Rm N/mm2)
|
Yield strength
(RP0.2N/mm2)
|
Elongation(A5%)
|
HB
|
|
Monel 400
|
480
|
170
|
35
|
≥331
|
|
Production Standard
|
|||||
|
|
Bar
|
Forging
|
Pipe
|
Sheet/Strip
|
Welding Wire
|
|
Standard
|
ASTM B164
|
ASTM B564
|
ASTM B165
|
ASTM B127
|
ERNiCu-7
|
1. How can we guarantee quality?
We can provide pre-production sample before mass production and final Inspection before shipment.
2. Could you provide OEM/ODM service?
Yes. Please feel free to contact us for more details.
3: Which countries do you export to?
Our products are mainly exported to Australia, Canada, Britain, the United States, Germany, Thailand, South Korea and so on.
4:Do you provide samples? Is it free or extra?
Yes, we can provide samples , but we don't pay the freight.
5: How about the delivery time?
It is order based, usually within 15-30 days after receiving your advance payment.
6 What is your terms of payment?
30% T/T in advance, the balance 70% before delivery. We will show you the photos of products and package before you pay the balance.
7 what is the terms of delivery?
EXW, FOB, CIF, CFR, DDU
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.