1x2 m Thickness 1.5 mm Stainless Steel Sheet ASTM A240 AISI 316LN DIN1.4492
Grade 316LN Sheets 1x2 m Thickness 1.5 mm ASTM A240 AISI 316LN DIN1.4492 Stainless Steel Sheet
1 |
Commodity | Stainless Steel Sheet/Plate Stainless Steel Decorative Sheets/Plate Stainless Steel Diamond Sheet/Plate Stainless Steel Perforated Sheet/Plate |
| 2 | Material | 304 ,304L ,316 ,316L 430, etc |
| 3 | Surface | 2B, BA, HL, 4K, 6K, 8K , NO.1, NO. 2, NO.4, SB |
| 4 | Standard | AISI, ASTM, DIN, EN, JIS, etc |
| 5 | Specification | (1) Thickness: 0.5mm- 300mm (2) Width: 1000mm-2000mm (3) Length: 2000mm, 2438mm, 3000mm, 6000mm, etc (4) The specifications can be provided as clients' requirement. |
| 6 | Application | (1) Construction, Decoration (2) Petroleum, Chemical Industry (3) Electrical Appliances, Automotive, Aerospace (4) House Ware, Kitchen Appliances, Cutlery, Foodstuff (5) Surgical Instrument |
| 7 | Advantage | (1) High surface quality, clean, smooth finish (2) Good corrosion resistance, durability than ordinary steel (3) High strength and to deform (4) Not easy to be oxidized (5) Good welding performance (6) The use of diversity |
| 8 | Package | (1) Products are packed and labeled according to regulation (2) According to customers' requirement |
| 9 | Delivery | within 20 working days since we get the deposit, mainly according to your quantity and the ways of transportation |
| 10 | Payment | T/T, L/C |
| 11 | Shipment | FOB/CIF/CFR |
| 12 | Productivity | 500tons/month |
| 13 | Note | Any size can be customized as requirement. |
Chemical Composition of 316LN / 1.4429
The typical chemical composition of 316LN Stainless Steel (also known as UNS S31653 or 1.4429) is as follows:
- Iron (Fe): balance
- Chromium (Cr): 16-18%
- Nickel (Ni): 11-14%
- Molybdenum (Mo): 2-3%
- Nitrogen (N): 0.1-0.2%
- Carbon (C): 0.03% max
- Manganese (Mn): 2% max
- Silicon (Si): 1% max
- Phosphorus (P): 0.045% max
- Sulfur (S): 0.03% max
Adding nitrogen to 316LN steel improves its strength and ability to resist corrosion. The nitrogen content typically ranges between 0.1-0.2%. The carbon content is kept low to prevent carbide precipitation, which can cause corrosion in some environments.
The chemical makeup of 316LN can change based on how it is made and who supplies it. Therefore, it's always a good idea to check with the supplier or consult the material certificate for the exact chemical composition of the 316LN being used in a specific application.
Physical & Mechanical Properties of 316LN / 1.4429
The physical and mechanical properties of 316LN Stainless Steel (also known as UNS S31653 or 1.4429) are as follows:
- Density: 7.98 g/cm3
- Melting point: 1399-1454 °C (2550-2650 °F)
- Specific heat: 0.5 J/g·K
- Thermal conductivity: 16.3 W/m·K
- Thermal expansion: 15.9 x 10^-6/K
- Modulus of elasticity: 193 GPa
- Tensile strength: 550-700 MPa
- Yield strength: 240 MPa min
- Elongation: 40% min
- Hardness: Rockwell B90
- Impact toughness: 27 J (20 ft-lb)
Due to the addition of nitrogen, 316LN has a higher yield strength, tensile strength, and hardness than standard 316L. This means that it is able to withstand higher stress levels before deforming or breaking. But, stronger steel is less flexible and more likely to crack in certain situations due to reduced ductility.
316LN also has good resistance to corrosion in high-temperature environments. It is commonly used in oil, gas, marine, and chemical industries for high-temperature and corrosion resistance.
The properties of 316LN can change based on how it's made and who makes it. Therefore, it's always a good idea to check with the supplier or consult the material certificate for the exact properties of the 316LN being used in a specific application.
Q1:Can you send samples?
A:Of course, we can provide customers with free samples and express shipping service to all over of the world.
Q2:What product information do I need to provide?
A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to
purchase.
Q3:It's my first time to import steel products, can you help me with it?
A:Sure,we have agent to arrange the shipment, we will do it together with you.
Q4:What ports of shipment are there?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your
needs.
Q5:What about product prices information?
A:Prices various according to periodic price changes of raw materials.
Q6:What is your terms of payment ?
A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at
sight.
Q7.Do you provide custom made Products service?
A: Yes,if you have your own design , we can produce according to your specification and drawing.
Q8:What are the certifications for your products?
A:We have ISO 9001, MTC, third parties' inspections are all available such SGS, BV ect.
Q9:How long does your delivery time take?
A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances
occur.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.