Nickel Alloy 718 Round Bar 718 Nickel Alloy W. Nr. 2.4668 UNS N07718 GH4169
Nickel Alloy 718 Round Bar 718 Nickel AlloyInconel 718 round Bar W. Nr. 2.4668 UNS N07718 GH4169 Black and Bright Bar
Nickel Alloy 718 (INCONEL® 718) | UNS# N07718
Nickel 718 (UNS# N07718), or Inconel 718 is a precipitation hardening nickel-chromium alloy that contains molybdenum, iron, columbium, and smaller traces of aluminum and titanium. Designed to exhibit significant yields, high strength, good ductility, and creep rupture properties up to 1300°F (704°C). These characteristics provide alloy 718 good formability, weldability, and cryogenic allowances compared to the metals other nickel based superalloys. The sluggish age hardening characteristics in alloy 718 also allow annealing and welding without the occurrence of spontaneous hardening during heating and cooling. This alloy is also non-magnetic, maintains significant corrosion and oxidation resistances and can be used in applications like jet engines, airframe components, and high temp bolts and fasteners.
Nickel Alloy 718 Inventory Size Range:
- Round Bar (diameter): 0.250″/6.35 mm – 14.000″/355.6 mm
- Nickel Alloy 718 Round Bar
718 Nickel Alloy Round Bar Specifications:
Common Names:
- ATI 718
- Haynes 718
- INCONEL® Alloy 718
Nickel Alloy 718 Applications:
- Jet engines
- Rotor Bolts
- Gas turbine operations
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
Chemical Composition
| C | Mn | Fe | P | S | Si | Cu | Ni | Co | Al | Ti | Cr | Nb+Ta | Mo | |
| Inconel 600 | ≤0.15 | ≤1.0 | 6.0-10.0 | ≤0.015 | ≤0.015 | ≤0.5 | ≤0.5 | ≥72.0 | -- | -- | -- | 14.0-17.0 | -- | -- |
| Inconel 601 | ≤0.1 | ≤1.5 | balance | ≤0.02 | ≤0.015 | ≤0.5 | ≤1.0 | 58.0-63.0 | -- | 1.0-1.7 | -- | 21.0-25.0 | -- | -- |
| Inconel 625 | ≤0.1 | ≤0.5 | ≤5.0 | ≤0.015 | ≤0.015 | ≤0.5 | -- | ≥58.0 | ≤1.0 | ≤0.4 | ≤0.4 | 20.0-23.0 | 3.15-4.15 | 8.0-10.0 |
| Inconel 617 | 0.05-0.15 | ≤1.0 | -- | ≤0.012 | ≤0.015 | ≤1.0 | ≤0.5 | ≥44.5 | 10.0-13.0 | 0.8-1.5 | ≤0.6 | 20.0-24.0 | -- | 8.0-10.0 |
| Inconel 690 | ≤0.05 | ≤0.5 | 7.0-11.0 | -- | ≤0.015 | ≤0.5 | ≤0.5 | ≥58.0 | -- | -- | -- | 27.0-31.0 | -- | -- |
| Inconel 718 | ≤0.08 | ≤0.35 | balance | ≤0.015 | ≤0.015 | ≤0.35 | ≤0.3 | 50.0-55.0 | ≤1.0 | 0.2-0.8 | 0.65-1.15 | 17.0-21.0 | 2.8-3.3 | |
| Inconel 725 | ≤0.03 | ≤0.35 | ≤0.015 | ≤0.010 | ≤0.20 | 55.0-59.0 | 19.0-22.5 | 7.0-9.5 | ||||||
| Inconel 750 | ≤0.08 | ≤1.0 | 5.0-9.0 | -- | ≤0.01 | ≤0.5 | ≤0.5 | ≥70.0 | ≤1.0 | 0.4-1.0 | 2.25-2.75 | 14.0-17.0 | 0.7-1.2 | -- |
| Inconel 20 | ≤0.07 | ≤2.0 | balance | ≤0.045 | ≤0.035 | ≤1.0 | 3.0-4.0 | 32.0-38.0 | -- | -- | -- | 19.0-21.0 | 8*C-1 | 2.0-3.0 |
| Inconel 28 | ≤0.02 | ≤2.5 | balance | ≤0.02 | ≤0.015 | ≤1.0 | 0.6-1.4 | 30.0-34.0 | 26.0-28.0 | 3.0-4.0 | ||||
| Inconel 925 | ≤0.03 | ≤1.0 | balance | ≤0.03 | ≤0.03 | ≤0.5 | 1.5-3.0 | 42.0-46.0 | -- | 0.15-0.5 | 1.9-2.4 | 19.5-23.5 | -- | 2.5-3.5 |
| Inconel 926 | ≤0.02 | ≤2.0 | balance | ≤0.03 | ≤0.01 | ≤0.5 | 0.5-1.5 | 24.0-26.0 | -- | -- | -- | 19.0-21.0 | -- | 6.0-7.0 |
| Inconel 825 | ≤0.05 | ≤1.0 | balance | ≤0.02 | ≤0.03 | ≤0.5 | 1.5-3.0 | 38.0-46.0 | -- | ≤0.2 | 0.6-1.2 | 19.5-23.5 | -- | 2.5-3.5 |
| Inconel 800 | ≤0.1 | ≤1.5 | balance | -- | ≤0.015 | ≤1.0 | ≤0.75 | 30.0-35.0 | -- | 0.15-0.6 | 0.15-0.6 | 19.0-23.0 | -- | -- |
| Inconel 800H | 0.05-0.1 | ≤1.5 | balance | ≤0.015 | ≤1.0 | ≤0.75 | 30.0-35.0 | -- | 0.15-0.6 | 0.15-0.6 | 19.0-23.0 | -- | -- | |
| Inconel 800HT | 0.06-0.1 | ≤1.5 | balance | ≤0.015 | ≤1.0 | ≤0.75 | 30.0-35.0 | 0.15-0.6 | 0.15-0.6 | 19.0-23.0 |
| PHYSICAL PROPERTIES | |||||||
|---|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat (BTU/lb-°F) | Thermal expansion (1/°F) | Thermal expansion | Melting Point (°F) | |
| 0.296 | 1.38 | 77 | 0.104 | 7.22E-06 | – | 2300 | |
| MECHANICAL PROPERTIES | ||
|---|---|---|
| PROPERTY | MINIMUM | MAXIMUM |
| Yield Strength Range (Rp0.2 Offset) (ksi) | 80 | 150 |
| Tensile Strength Range (Rm) (ksi) | 14 | 220 |
| Elongation (AL=5 x Ø) | 18% | 27% |
| Brinell Hardness (H) | 102 | 331 |
| Modulus of Elasticity (ksi) (E): 29600 | ||
| Machineability General Index: 12% | ||
Q1: What product information do I need to provide?
A1: You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
A2: Delivery time of stock products: 3-7 days after payment. Custom product delivery time: 20-45 days after payment.
Q3: Can I have a sample for testing?
A3: The cost of the samples is according to the value. The cost of the freight is necessary.
Q4: Do you have inspection for the products before packing?
A4: All products have to go through three checks in the whole manufacturing process,it includes production and Random Testing in warehouse and Before Shipping.and accept the third party inspection .
Q5: Can I get your best price?
A5: Price is different based on steel grade, size and quantity.Our goal is to provide you the best price with great quality
assured in a long run.Please leave your contact information for the includes production.we will get back to you with the best solutions as soon as we can.Please give those info, for price checking.If the required is sheet metal fabrication, please send drawing.
Q6:How to order?
A6: Buyer sends the inquiry --> Buyer gets the quotation-->Order confirmation-->Buyer send the deposit-->Seller prepares
Q7:what kind of payment does your company support?
A7: T/T, L/C at sight, are all accepted.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.