Lvds 30 Pins Industrial LCD Display 1280x1024 19 Inch LCD Display All Viewing Angle
19 Inch Lcd Display 1280x1024 Lvds Interface 30 Pins DV190E0M-N11 All Viewing Angle
General Description:
DV190E0M-N11 is a 19.0" LCD module product with a-Si TFT-LCD technology, it is assembled with WLED backlight, no backlight driver, no touch. typical features as: landscape mode / portrait mode, white LED backlight, positive terminal mount, and matte surface.
Features:
1.LVDS interface with 2 pixel / clock
2.High-speed response
3.Low color shift image quality
4.6-bit (Hi-FRC) color depth, display 16.7M colors
5.Wide viewing angle
6.DE (Data Enable) only mode
7.HADS technology is applied for high display quality
8.RoHS compliant
Specifications:
| Parameter | Specification | Unit | Remarks |
| Active area | 374.784(H) × 299.8272 (V) | mm | |
| Number of pixels | 1280(H) × 1024(V) | pixels | |
| Pixel pitch | 97.6(H) ×292.8(V) | um | |
| Pixel arrangement | Pixels RGB Vertical stripe | ||
| Display colors | 16.7M | colors | 6bits+FRC |
| Display mode | Normally Black | ||
| Dimensional outline | 396.0(H) × 324.0(V)×9.9(D) | mm | Detail refer to drawing |
| Weight | 1520 | g | 19.82kg/box |
| Power Consumption | 10.64 Typ. 14.216 Max. | Watt | BLU Consumption 8.64 Typ. 9.216 Max. |
| Bezel width (L/R/U/D) | 8.6/8.6/ 10.5/ 10.5 | mm | |
| Surface Treatment | Haze 25%, 3H | ||
| Back-light | Down edge side, 1- LED Light bar | ||
| Possible display type | Landscape and Portrait Enabled |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Max. | Unit | Remark |
| Power Supply Voltage | VDD | -0.3 | 6.0 | V | Ta = 25 ℃ |
| Logic Supply Voltage | VIN | VSS-0.3 | VDD+0.3 | V | |
| Operating Temperature | TOP | 0 | +50 | ℃ |
|
| Storage Temperature | TSUR | -20 | +60 | ℃ | |
| TST | -20 | +60 | ℃ | ||
| Operating Ambient Humidity | Hop | 10 | 80 | %RH | |
| Storage Humidity | Hst | 10 | 80 | %RH |
Electrical Specifications:
| Parameter | Symbol | Values | Unit | Remark | |||
| Min | Typ | Max | |||||
| Power Supply Input Voltage | VDD | 4.5 | 5.0 | 5.5 | Vdc | ||
| Power Supply Ripple Voltage | VRP | - | - | 200 | mV | ||
| Power Supply Current | IDD | - | 400 | 1000 | mA | Note 1 | |
| Power Consumption | PDD | - | 2 | 5 | Watt | ||
| Rush current | IRUSH | - | 3.0 | A | Note 2 | ||
|
LVDS Interface |
Differential Input High Thr eshold Voltage | VLVTH | + 100 |
- |
+300 | mV | |
|
Differential Input Low Threshold Voltage |
VLVTL | -300 |
- |
- 100 | mV | ||
| Input Differential Voltage | | VID | | 200 | - | 600 | mV | ||
| Differential input common mode voltage |
VCM |
1.0 |
1.2 |
1.5 |
V |
||
Note 1:The supply voltage is measured and specified at the interface connector of LCM.
The current draw and power consumption specified is for VDD=5.0V,Frame rate fV=60Hz and Clock frequency=54MHz.
Note 2:The duration of rush current is about 2ms and rising time of Power Input is 1ms(min).
| Parameter | Min. | Typ. | Max. | Unit | Remarks | ||
| LED Light Bar Input Voltage Per Input Pin | VPIN | 32.4 | 36 | 38.4 | V | Duty 100% | |
| LED Light Bar Input Current Per Input Pin |
IPIN |
- |
120 |
- |
mA |
- |
|
| Total Current | 240 | mA | |||||
| Total Voltage | 32.4 | 36 | 38.4 | V | |||
| LED Power Consumption | PBL | 8.64 | 9.22 | W | |||
| LED Life-Time | N/A | 30000 |
- |
- |
Hour | IF = 120mA | |
|
PWM Control Level |
PWM High Level |
- |
- |
- |
V |
||
| PWM Low Level |
- |
- |
- |
V |
|||
|
PWM Control Frequency |
FPWM |
- |
- |
- |
Hz |
||
| Duty Ratio |
- |
- |
- |
- |
% | ||
Interface Connection:
LVDS Connector : IS100-L30O-C23(UJU)
| Pin No | Symbol | Description | Pin No | Symbol | Description |
| 1 | RXO0- |
Negative Transmission data of Pixel 0 (ODD) |
16 | RXE1+ | Positive Transmission data of Pixel 1 (EVEN) |
| 2 | RXO0+ | Positive Transmission data of Pixel 0 (ODD) | 17 | GNG | Power Ground |
| 3 | RXO1- |
Negative Transmission data of Pixel 1 (ODD) |
18 | RXE2- |
Negative Transmission data of Pixel 2 (EVEN) |
| 4 | RXO1+ | Positive Transmission data of Pixel 1 (ODD) | 19 | RXE2+ | Positive Transmission data of Pixel 2 (EVEN) |
| 5 | RXO2- |
Negative Transmission data of Pixel 2 (ODD) |
20 | RXEC- | Negative Transmission Clock (EVEN) |
| 6 | RXO2+ | Positive Transmission data of Pixel 2 (ODD) | 21 | RXEC+ |
Positive Transmission Clock (EVEN) |
| 7 | GND | Power Ground | 22 | RXE3- |
Negative Transmission data of Pixel 3 (EVEN) |
| 8 | RXOC- | Negative Transmission Clock (ODD) | 23 | RXE3+ | Positive Transmission data of Pixel 3 (EVEN) |
| 9 | RXOC+ |
Positive Transmission Clock (ODD) |
24 | GND | Power Ground |
| 10 | RXO3- |
Negative Transmission data of Pixel 3 (ODD) |
25 | NC | No. Connection |
| 11 | RXO3+ | Positive Transmission data of Pixel 3 (ODD) | 26 | NC | No. Connection |
| 12 | RXE0- |
Negative Transmission data of Pixel 0 (EVEN) |
27 | NC | No. Connection |
| 13 | RXE0+ | Positive Transmission data of Pixel 0 (EVEN) | 28 | VDD |
Power Supply: +5V |
| 14 | GND | Power Ground | 29 | VDD | |
| 15 | RXE1- |
Negative Transmission data of Pixel 1 (EVEN) |
30 | VDD |
Handling Precautions:
1.Do not connector or disconnect the cable to/from the Module at the “Power On” Condition.
2.When the module is operating, do not lose CLK, ENAB signals. If any one of these signals i s lost, the module would be damaged.
3.The electrochemical reaction caused by DC voltage will lead to LCD module degradation, so DC drive should be avoided.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.