16.2M 15.6" IPS TFT LCD Display 1920x1080 All Viewing Angle EDP 30 Pin
15.6 Inch Lcd Screen 1920x1080 All Viewing Angle Edp Interface 30 Pins
General Description:
Typical features of NV156FHM-N69 are: sRGB, white LED backlight, LED driver included, terminal flip-flop, matte surface, AMD FreeSync; display area size is 344.16×193.59 (W×H) mm, exterior dimensions are 350.66(W)×211.54(H)×2.6(D) mm, net weight 280g (Max.), thin screen (PCBA flat, thickness ≤ 3.2mm).
Features:
1.2 lane eDP interface with 2.7Gbps link rates
2.Thin and light weight
3.16.2M(6bits+FRC) color depth, color gamut sRGB 100%
4.Single LED lighting bar (Bottom side/Horizontal Direction)
5.Data enable signal mode
6.Side mounting frame
7.Green product (RoHS & Halogen free product)
8.On board LED driving circuit
9.Low driving voltage and low power consumption
10.On board EDID chip
11.Adjust backlight brightness with DC mode
Specifications:
| Parameter | Specification | Unit |
| Active area | 344.16(H) × 193.59(V) | mm |
| Number of pixels | 1920 (H) × 1080 (V) | pixels |
| Pixel pitch | 179.25(H) × 179.25(V) | um |
| Pixel arrangement | RGB Vertical stripe | |
| Display colors | 16.2M(6bits+FRC) | |
| Color gamut | sRGB 100% | |
| Display mode | Normally Black | |
|
Dimensional outline |
350.66± 0.3 (H)*204.04± 0.3(V)(W/O PCB)*2.6 (Max) 350.66±0.3(H)*211.54±0.5(V) (W/PCB)*2.6 (Max) | mm |
| Weight | 280(max) | g |
| Surface treatment | Anti-Glare | |
| Surface hardness | 3H | |
| Back-light | Bottom edge side, 1-LED lighting bar type | |
|
Power consumption |
PD : 0.75(Max.) | W |
| PBL : 3.3(Max.) | W | |
| PTotal : 4.05(Max.) | W |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Max. | Unit |
| Power Supply Voltage |
VDD |
-0.3 | 4.0 | V |
| eDP input Voltage | VeDP | 0 | 2.0 | V |
| Logic Supply Voltage |
VIN |
VSS-0.3 | VDD+0.3 | V |
| Operating Temperature |
TOP |
0 | +50 | °C |
| Storage Temperature |
TST |
-20 | +60 | °C |
Electrical Specifications:
| Parameter | Min. | Typ. | Max. | Unit | ||
| Power Supply Voltage | VDD | 3.0 | 3.3 | 3.6 | V | |
| Permissible Input Ripple Voltage |
VRF |
-10% VDD |
- |
+10% VDD |
V |
|
|
BIST Control Level |
High Level |
1.44 |
- |
3.3 | V | |
|
Low Level |
0 |
- |
0.27 | V | ||
| Power Supply Inrush Current | Inrush | - | - | 2 | A | |
| Power Supply Current | Mosaic |
DD |
- | - | 228 | mA |
| RGB | - | - | 334 | mA | ||
|
Power Consumption |
Mosaic | PM | - | - | 0.75 | W |
| RGB | PRGB | - | - | 1.1 | W | |
| BLU | PBL | - | - | 3.3 | W | |
| Total | PTotal | - | - | 4.05 | W | |
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
|
Viewing AngleRange |
Horizontal |
Θ3 |
CR > 10 |
- | 85 | - | Deg. |
|
Θ9 |
- | 85 | - | Deg. | |||
| Vertical |
Θ12 |
- | 85 | - | Deg. | ||
|
Θ6 |
- | 85 | - | Deg. | |||
| Luminance Contrast Ratio | CR | Θ = 0. | 1000 | 1200 | - | ||
| Luminance of White | 5 Points |
Yw |
Θ = 0. ILED = 16.7mA |
255 | 300 | 375 | cd/m2 |
| White Luminance Uniformity | 5 Points | ΔY5 | 80 | - | - | % | |
| 13 Points | ΔY13 | 60 | - | - | % | ||
| White Chromaticity |
Wx |
Θ = 0. | 0.283 | 0.313 | 0.343 | ||
|
Wy |
0.299 | 0.329 | 0.359 | ||||
|
Reproduction of Color |
Red |
Rx |
Θ = 0. |
Typ.-0.03 |
0.646 |
Typ.+0.03 |
|
| R | 0.335 | ||||||
| Green |
Gx |
0.311 | |||||
|
Gy |
0.624 | ||||||
| Blue |
Bx |
0.154 | |||||
|
By |
0.059 | ||||||
|
Color Gamut(sRGB Match@1931) |
95 | 100 | - | % | |||
| Response Time (Rising + Falling) | TRT |
Ta= 25C Θ = 0. |
- |
20 | 25 | ms | |
| Cross Talk | CT | Θ = 0. | - | - | 2.0 | % | |
Interface Connection:
| Terminal | Symbol | Functions |
| Pin No. | Symbol | Description |
| 1 | NC | No Connection |
| 2 | H_GND | Ground |
| 3 | LANE1_N | eDP RX Channel 1 Negative |
| 4 | LANE1_P | eDP RX Channel 1 Positive |
| 5 | H_GND | Ground |
| 6 | LANE0_N | eDP RX Channel 0 Negative |
| 7 | LANE0_P | eDP RX Channel 0 Positive |
| 8 | H_GND | Ground |
| 9 | AUX_CH_P | eDP AUX CH Positive |
| 10 | AUX_CH_N | eDP AUX CH Negative |
| 11 | H_GND | Ground |
| 12 | LCD_VCC | Power Supply, 3.3V (typ.) |
| 13 | LCD_VCC | Power Supply, 3.3V (typ.) |
| 14 | BIST | Panel Self Test Enable |
| 15 | H_GND | Ground |
| 16 | H_GND | Ground |
| 17 | HPD | Hot Plug Detect Output |
| 18 | BL_GND | LED Ground |
| 19 | BL_GND | LED Ground |
| 20 | BL_GND | LED Ground |
| 21 | BL_GND | LED Ground |
| 22 | BL_ENABLE | LED Enable Pin(+3.3V Input) |
| 23 | BL_PWM | System PWM Signal Input |
| 24 | NC | No Connection |
| 25 | NC | No Connection |
| 26 | BL_POWER | LED Power Supply 5V-21V |
| 27 | BL_POWER | LED Power Supply 5V-21V |
| 28 | BL_POWER | LED Power Supply 5V-21V |
| 29 | BL_POWER | LED Power Supply 5V-21V |
| 30 | NC | No Connection |
Handling Precautions:
1.Note that polarizers are very fragile and could be easily damaged. Do not press or scratch the surface harder than 1 HB pencil lead.
2.If the surface of the polarizer is dirty, clean it using some absorbent cotton or soft cloth.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.