All Viewing Angle TFT 1920x1080 EDP Interface 30 Pins 15.6 LCD Screen

Price Negotiable

Price: USD60

MOQ: 10pcs

Delivery Time: 1work days

Brand: BOE

Product Description

15.6 Inch Tft 1920x1080 All Viewing Angle Edp Interface 30 Pins

General Description:

NV156FHM-N69 has a matte finish, Hard coating (3H), and a net weight of 280g (Max.) The appearance is thin (PCBA flat, thickness ≤ 3.2mm). The backlight is 10S6P WLED side entry light source (bottom), the life of the light source is 15K hours, including LED driver.

Features:

1.2 lane eDP interface with 2.7Gbps link rates

2.Thin and light weight

3.16.2M(6bits+FRC) color depth, color gamut sRGB 100%

4.Single LED lighting bar (Bottom side/Horizontal Direction)

5.Data enable signal mode

6.Side mounting frame

7.Green product (RoHS & Halogen free product)

8.On board LED driving circuit

9.Low driving voltage and low power consumption

10.On board EDID chip

11.Adjust backlight brightness with DC mode

Specifications:

Parameter	Specification	Unit
Active area	344.16(H) × 193.59(V)	mm
Number of pixels	1920 (H) × 1080 (V)	pixels
Pixel pitch	179.25(H) × 179.25(V)	um
Pixel arrangement	RGB Vertical stripe
Display colors	16.2M(6bits+FRC)
Color gamut	sRGB 100%
Display mode	Normally Black
Dimensional outline	350.66± 0.3 (H)204.04± 0.3(V)(W/O PCB)2.6 (Max) 350.66±0.3(H)211.54±0.5(V) (W/PCB)2.6 (Max)	mm
Weight	280(max)	g
Surface treatment	Anti-Glare
Surface hardness	3H
Back-light	Bottom edge side, 1-LED lighting bar type
Power consumption	PD : 0.75(Max.)	W
	PBL : 3.3(Max.)	W
	PTotal : 4.05(Max.)	W

Absolute Maximum Ratings:

Parameter	Symbol	Min.	Max.	Unit
Power Supply Voltage	VDD	-0.3	4.0	V
eDP input Voltage	VeDP	0	2.0	V
Logic Supply Voltage	VIN	VSS-0.3	VDD+0.3	V
Operating Temperature	TOP	0	+50	°C
Storage Temperature	TST	-20	+60	°C

Electrical Specifications:

Parameter			Min.	Typ.	Max.	Unit
Power Supply Voltage		VDD	3.0	3.3	3.6	V
Permissible Input Ripple Voltage		VRF	-10% VDD	-	+10% VDD	V
BIST Control Level		High Level	1.44	-	3.3	V
BIST Control Level		Low Level	0	-	0.27	V
Power Supply Inrush Current		Inrush	-	-	2	A
Power Supply Current	Mosaic	DD	-	-	228	mA
Power Supply Current	RGB	DD	-	-	334	mA
Power Consumption	Mosaic	PM	-	-	0.75	W
	RGB	PRGB	-	-	1.1	W
	BLU	PBL	-	-	3.3	W
	Total	PTotal	-	-	4.05	W

Optical Specification:

Parameter		Symbol	Condition	Min.	Typ.	Max.	Unit
Viewing AngleRange	Horizontal	Θ3	CR > 10	-	85	-	Deg.
	Horizontal	Θ9		-	85	-	Deg.
	Vertical	Θ12		-	85	-	Deg.
	Vertical	Θ6		-	85	-	Deg.
Luminance Contrast Ratio		CR	Θ = 0.	1000	1200	-
Luminance of White	5 Points	Yw	Θ = 0. ILED = 16.7mA	255	300	375	cd/m2
White Luminance Uniformity	5 Points	ΔY5		80	-	-	%
White Luminance Uniformity	13 Points	ΔY13		60	-	-	%
White Chromaticity		Wx	Θ = 0.	0.283	0.313	0.343
White Chromaticity		Wy	Θ = 0.	0.299	0.329	0.359
Reproduction of Color	Red	Rx	Θ = 0.	Typ.-0.03	0.646	Typ.+0.03
	Red	R			0.335
	Green	Gx			0.311
	Green	Gy			0.624
	Blue	Bx			0.154
	Blue	By			0.059
Color Gamut(sRGB Match@1931)				95	100	-	%
Response Time (Rising + Falling)		TRT	Ta= 25C Θ = 0.	-	20	25	ms
Cross Talk		CT	Θ = 0.	-	-	2.0	%

Interface Connection:

Terminal	Symbol	Functions
Pin No.	Symbol	Description
1	NC	No Connection
2	H_GND	Ground
3	LANE1_N	eDP RX Channel 1 Negative
4	LANE1_P	eDP RX Channel 1 Positive
5	H_GND	Ground
6	LANE0_N	eDP RX Channel 0 Negative
7	LANE0_P	eDP RX Channel 0 Positive
8	H_GND	Ground
9	AUX_CH_P	eDP AUX CH Positive
10	AUX_CH_N	eDP AUX CH Negative
11	H_GND	Ground
12	LCD_VCC	Power Supply, 3.3V (typ.)
13	LCD_VCC	Power Supply, 3.3V (typ.)
14	BIST	Panel Self Test Enable
15	H_GND	Ground
16	H_GND	Ground
17	HPD	Hot Plug Detect Output
18	BL_GND	LED Ground
19	BL_GND	LED Ground
20	BL_GND	LED Ground
21	BL_GND	LED Ground
22	BL_ENABLE	LED Enable Pin(+3.3V Input)
23	BL_PWM	System PWM Signal Input
24	NC	No Connection
25	NC	No Connection
26	BL_POWER	LED Power Supply 5V-21V
27	BL_POWER	LED Power Supply 5V-21V
28	BL_POWER	LED Power Supply 5V-21V
29	BL_POWER	LED Power Supply 5V-21V
30	NC	No Connection