6 Bit 21.5 Inch LCD Panel Halogen Free 1920x1080 High Brightness Lvds Interface TFT Display 30 Pin
DV215FHM-NN0 voltage supply is 5.0V, frame rate is 60Hz, interface type is 30 pins LVDS (2 ch, 8-bit) , operating temperature: 0 ~ 50 °C ; storage temperature: -20 ~ 60 °C.
1.LVDS Interface with 2 pixel / clock
2.High-speed response
3.0.5t Glass
4.6-bit (Hi-FRC) color depth, display 16. 7M colors
5.Incorporated edge type back-light (One Light Bar)
6.High luminance and contrast ratio, low reflection and wide viewing angle
7.DE (Data Enable) only
8.RoHS/Halogen Free
9.ES 7.0 compliant
10.Gamma Correction
11.Reverse type
Specifications:
| Parameter | Specification | Unit |
| Active area | 476.064(H) × 267.786(V) | mm |
| Number of pixels | 1920(H) × 1080(V) | pixels |
| Pixel pitch | 0.24795(H) x 0.24795(V) | mm |
| Pixel arrangement | RGB Vertical stripe | - |
| Display colors | 16.7M | colors |
| Display mode | Normally Black | - |
| Dimensional outline | 495.6(H) × 292.2(V) × 10.7(D) typ. | mm |
| Weight | 1.97 | Kg |
| Bezel width (L/R/U/D) | 7.9/7.9/10.5/10.5 | mm |
| Surface Treatment | Anti-glare, 3H | - |
| Back-light | Lower side 1-LED Light bar Type | - |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Max. | Unit | Remarks |
| Power Supply Voltage |
VDD |
-0.3 | 5.5 | V |
Ta = 25℃ |
| Logic Supply Voltage |
VIN |
VSS-0.3 | VDD+0.3 | V | |
| Operating Temperature |
TOP |
0 | +50 | ℃ | |
| Storage Temperature |
TST |
-20 | +60 | ℃ |
Electrical Specifications:
| Parameter | Min. | Typ. | Max. | Unit | Remarks | |
| Power Supply Voltage |
VDD |
4.5 | 5.0 | 5.5 | V |
|
| Power Supply Current |
IDD |
- | 500 | 1200 | mA | |
| In-Rush Current | IRUSH | - | 2.0 | 3 | A | |
| Permissible Input Ripple Voltage |
VRF |
- | - | 300 | mV | VDD = 5.0V |
|
High Level Differential Input Threshold Voltage |
VIH |
- |
- |
+100 | mV | |
|
Low Level Differential Input Threshold Voltage |
VIL |
- 100 |
- |
- |
mV | |
| Differential input voltage | |VID | | 200 | - | 600 | mV | |
| Differential input common mode voltage | Vcm | 1.0 | 1.2 | 1.5 |
VIH=100mV, VIL=- 100mV |
|
| LED Voltage |
VL |
2.8 | 3.0 | 3.2 | V | |
| LED Channel Voltage |
VL |
- | 72 | 76.8 | V | |
| LED Channel Current |
IL |
80 | mA | |||
| LED Lifetime | 30,000 | - | - | Hrs | I =80 mA | |
|
Power Consumption |
PD |
- | 2.5 | 6 | W | |
|
PBL |
- | 17.3 | 18.4 | W | IL=80mA | |
|
Ptotal |
- | 19.8 | 24.4 | W | ||
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | ||
|
Viewing Angle range |
Horizontal |
Θ3 |
CR > 10 |
85 | 89 | - | Deg. | |
|
Θ9 |
85 | 89 | - | Deg. | ||||
|
Vertical |
Θ12 |
85 | 89 | - | Deg. | |||
|
Θ6 |
85 | 89 | - | Deg. | ||||
| Luminance Contrast ratio | CR |
Θ = 0o (Center) Normal Viewing Angle |
700 | 1000 | ||||
| Luminance of White |
Yw |
480 | 500 | - | cd/m2 | |||
| White luminance uniformity | ΔY | 75 | - | - | % | |||
|
Reproduction of color
|
White |
W | 0.283 | 0.313 | 0.343 | - | ||
| W | 0.299 | 0.329 | 0.359 | - | ||||
|
Red |
R | 0.608 | 0.638 | 0.668 | - | |||
| R | 0.327 | 0.357 | 0.387 | - | ||||
|
Green |
G | 0.284 | 0.314 | 0.344 | - | |||
| G | 0.608 | 0.638 | 0.668 | - | ||||
|
Blue |
Bx |
0.122 | 0.152 | 0.182 | - | |||
|
By |
0.038 | 0.068 | 0.098 | - | ||||
|
Response Time |
GTG |
Tg |
14 | 20 | ms | |||
| Cross Talk | CT |
- |
- |
2.0 | % | |||
Interface Connection:
Module Side Connector : UJU IS100-L30R-C23or Equivalent
User Side Connector : JAE FI-X30H or Equivalent
| Pin No | Symbol | Function | Remark |
| 1 | RXO0- | Negative Transmission data of Pixel 0 (ODD) | |
| 2 | RXO0+ | Positive Transmission data of Pixel 0 (ODD) | |
| 3 | RXO1- | Negative Transmission data of Pixel 1 (ODD) | |
| 4 | RXO1+ | Positive Transmission data of Pixel 1 (ODD) | |
| 5 | RXO2- | Negative Transmission data of Pixel 2 (ODD) | |
| 6 | RXO2+ | Positive Transmission data of Pixel 2 (ODD) | |
| 7 | BIST | Bist function | Note1 |
| 8 | RXOC- | Negative Transmission Clock (ODD) | |
| 9 | RXOC+ | Positive Transmission Clock (ODD) | |
| 10 | RXO3- | Negative Transmission data of Pixel 3 (ODD) | |
| 11 | RXO3+ | Positive Transmission data of Pixel 3 (ODD) | |
| 12 | RXE0- | Negative Transmission data of Pixel 0 (EVEN) | |
| 13 | RXE0+ | Positive Transmission data of Pixel 0 (EVEN) | |
| 14 | GND | Power Ground | |
| 15 | RXE1- | Negative Transmission data of Pixel 1 (EVEN) | |
| 16 | RXE1+ | Positive Transmission data of Pixel 1 (EVEN) | |
| 17 | GND | Power Ground | |
| 18 | RXE2- | Negative Transmission data of Pixel 2 (EVEN) | |
| 19 | RXE2+ | Positive Transmission data of Pixel 2 (EVEN) | |
| 20 | RXEC- | Negative Transmission Clock (EVEN) | |
| 21 | RXEC+ | Positive Transmission Clock (EVEN) | |
| 22 | RXE3- | Negative Transmission data of Pixel 3 (EVEN) | |
| 23 | RXE3+ | Positive Transmission data of Pixel 3 (EVEN) | |
| 24 | GND | Power Ground | Note 2 |
| 25 | CTL | *Reserved for LCD manufacturer’s(CTL_DVR) | |
| 26 | CE | *Reserved for LCD manufacturer’s(CE_DVR) | |
| 27 | NC | ||
| 28 | VDD |
Power Supply: +5V |
|
| 29 | VDD | ||
| 30 | VDD |
Note 1 : H: White-Black-Red-Green-Blue Pattern Aging, L:Black pattern , when no LVDS signal.
Note2: This pin should be connected with GND.
Handling Precautions:
1.Design the length of cable to connect between the connector for back-light and the converter as shorter as possible and the shorter cable shall be connected directly , The long cable between back-light and Converter may cause the Luminance of LED to lower and need a higher startup voltage.
2.The electrochemical reaction caused by DC voltage will lead to LCD module degradation, so DC drive should be avoided.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.