EDP 13.3" Laptop LCD Screen Ips Viewing Angle 30 Pins 1920x1080 TFT
13.3 Inch Lcd Display 1920x1080 Ips Viewing Angle Edp Interface 30 Pins
General Description:
The NE133FHM-N57 display resolution is 1920 (RGB) x 1080 (FHD), aspect ratio is 16:9 (W:H), and the pixels are arranged in vertical RGB stripes. Its display area size is 293.76×165.24 (W×H) mm, exterior size is 298.76(W)×181.33(H)×2.377(D) mm, product net weight is 172.2g (Max.), exterior style is thin (PCBA flat, thickness ≤3.2mm).
Specifications:
| Parameter | Specification | Unit |
| Active area | 293.76(H) ×165.24 (V) | mm |
| Number of pixels | 1920 (H) ×1080 (V) | pixels |
| Pixel pitch | 51 x 153 | um |
| Pixel arrangement | RGB Vertical stripe | |
| Display colors | 16.7M (8bit) | |
| Color gamut | DCI-P3 100% Typ,95%Min | |
| Display mode | Normally Black | |
| Dimensional outline |
298.76 ±0.3(H)*181.33 ±0.5(V) (W/PCB)*2.377(Max) |
mm |
| Weight | 172.2(max) | g |
| Surface treatment | HC | |
| Surface hardness | 3H | |
| Back-light | Lower Down side, 1-LED Lighting Bar type | |
|
Power consumption
|
PD: 0.39(Max) | W |
| PBL: 3.5(Max) | W | |
| PTotal : 3.89(Max) | W |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Max. | Unit |
| Supply Voltage |
VDD |
-0.3 | 4.0 | V |
| eDP input Voltage | VeDP | 0 | 2.0 | V |
| Logic Supply Voltage |
VIN |
VSS-0.3 | VDD+0.3 | V |
| Operating Temperature |
TOP |
0 | +50 | °C |
| Storage Temperature |
TST |
-20 | +60 | °C |
Electrical Specifications:
| Parameter | Min. | Typ. | Max. | Unit | ||
| Power Supply Voltage |
VDD |
390 | 3.3 | 3.6 | V | |
|
Permissible Input Ripple Voltage |
VRF |
- |
- |
300 |
mV |
|
| Power Supply Inrush Current | Inrush | - | - | 2 | A | |
|
Power Supply Current |
Mosaic |
IDD
|
- | - | 119 | mA |
| RGB | - | - | 119 | mA | ||
|
Power Consumption |
Mosaic |
PM |
- | - | 0.39 | W |
| RGB |
PRGB |
- | - | 0.39 | W | |
| BLU |
PBL |
- | - | 3.5 | W | |
| Total |
PTotal |
- | - | 3.89 | W | |
Interface Connection:
| Terminal | Symbol | Functions |
| Pin No. | Symbol | Description |
| 1 | GND | Ground |
| 2 | Lane1_N | eDP RX channel 1 negative |
| 3 | Lane1_P | eDP RX channel 1 positive |
| 4 | GND | Ground |
| 5 | Lane0_N | eDP RX channel 0 negative |
| 6 | Lane0_P | eDP RX channel 0 positive |
| 7 | GND | Ground |
| 8 | AUX_CH_P | eDP AUX CH positive |
| 9 | AUX_CH_N | eDP AUX CH negative |
| 10 | GND | Ground |
| 11 | LCD_VCC | Power Supply, 3.3V (typ.) |
| 12 | LCD_VCC | Power Supply, 3.3V (typ.) |
| 13 | BIST | Self Test |
| 14 | GND | Ground |
| 15 | GND | Ground |
| 16 | HPD | Hot plug detect output |
| 17 | NC | No Connection |
| 18 | NC | No Connection |
| 19 | FB1 | LED Current Feedback |
| 20 | FB2 | LED Current Feedback |
| 21 | FB3 | LED Current Feedback |
| 22 | FB4 | LED Current Feedback |
| 23 | FB5 | LED Current Feedback |
| 24 | FB6 | LED Current Feedback |
| 25 | NC | No Connection |
| 26 | NC | No Connection |
| 27 | VLED | LED Power Supply |
| 28 | VLED | LED Power Supply |
| 29 | VLED | LED Power Supply |
| 30 | VLED | LED Power Supply |
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
|
Viewing Angle Range |
Horizontal |
Θ3 |
CR > 10 |
80 | 85 | - | Deg. |
| Θ9 | 80 | 85 | - | Deg. | |||
| Vertical |
Θ12 |
80 | 85 | - | Deg. | ||
|
Θ6 |
80 | 85 | - | Deg. | |||
| Luminance Contrast Ratio | CR | Θ = 0° | 800 | 1000 | - | ||
| Luminance of White | center |
Yw |
Θ = 0° ILED = 19.7mA |
312 | 390 | 468 | cd/m2 |
| White Luminance Uniformity | 5 Points | ΔY5 | - | - | - | % | |
| 13 Points | ΔY13 | 70% | - | - | % | ||
|
White Chromaticity |
CCT | Θ = 0° | 6300 | 6800 | 7500 | ||
| MPCD | -5 | 10 | 25 | ||||
|
Reproduction of Color |
Red |
Rx |
Θ = 0°
|
Typ.-0.03 |
0.680 |
Typ.+0.03 |
|
| Ry | 0.318 | ||||||
| Green |
Gx |
0.256 | |||||
|
Gy |
0.703 | ||||||
| Blue |
Bx |
0.151 | |||||
|
By |
0.046 | ||||||
| Color Gamut | DCI-P3 | 95 | 100 | - | % | ||
| Response Time(Rising+Falling) | TRT |
Ta= 25℃Θ=0° |
- |
60 |
- |
ms | |
| Cross Talk | CT | Θ = 0° | - | - | 2.0 | % | |
Handling Precautions:
1.Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended.
2.Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.