250 Nits 21.5" Lvds Display Panel 1920x1080 IPS TFT 30 Pins
21.5 Inch Ips Tft Display 1920x1080 With Lvds Interface 30 Pins 250 Nits
General Description:
The M215HCA-L3B display resolution is 1920 (RGB) x 1080 (FHD), aspect ratio is 16:9 (W:H), and pixels are arranged in vertical RGB stripes. Its display area size is 476.064×267.786 (W×H) mm, exterior size is 484.5×284.4 (W×H)×12.2 (thick) mm, surface treatment is Haze 25%, Hard coating (3H), and product net weight is 1.82±0.18Kgs.
Specifications:
| Item | Specification | Unit |
| Screen Size | 21.5” real diagonal | |
| Driver Element | a-si TFT active matrix | - |
| Pixel Number | 1920 x R.G.B. x 1080 | pixel |
| Pixel Pitch | 0.24795 (H) x 0.24795 (V) | mm |
| Pixel Arrangement | RGB vertical stripe | - |
| Display Colors | 16.7M(8bit) | color |
| Transmissive Mode | Normally Black | - |
| Surface Treatment | AG type, 3H hard coating, Haze 25 | - |
| Luminance, White | 250 | Cd/m2 |
| Color Gamut | 72% of NTSC(Typ.) | - |
| Display Orientation | Signal input with “ INX” | |
| RoHS,Halogen Free &TCO 6.0 | RoHS, Halogen Free TCO 6.0 compliance | |
| Power Consumption | Total 15.93W (Max.) @ cell 4.05W (Max.), BL 11.88W (Max.) | |
Absolute Maximum Ratings:
| Item | Symbol | Value | Unit | |
| Min. | Max. | |||
| Storage Temperature | TST | -20 | 60 | ºC |
| Operating Ambient Temperature | TOP | 0 | 50 | ºC |
Electrical Specifications:
| Parameter | Symbol | Value | Unit | ||||
| Min. | Typ . | Max . | |||||
| Power Supply Voltage | Vcc | 4.5 | 5.0 | 5.5 | V | ||
| Ripple Voltage | VRP | - | - | 300 | mV | ||
| Rush Current | IRUSH | - | - | 3 | A | ||
|
Power Supply Current |
White |
- - - |
- | 550 | 640 | mA | |
| Black | - | 530 | 620 | mA | |||
| Vertical Stripe | - | 700 | 810 | mA | |||
| Power Consumption | PLCD | - | 3.5 | 4.05 | Watt | ||
|
LVDS interface |
Differential Input Voltage | VID | 100 | - | 600 | mV | |
| Common Input Voltage | VCM | 1.0 | 1.2 | 1.4 | V | ||
| Differential Input High Threshold Voltage | VTH | - | - | +100 | mV | ||
| Differential Input Low Threshold Voltage | VTL | - 100 | - | - | mV | ||
Interface Connection:
| Pin | Name | Description |
| 1 | RXO0- | Negative LVDS differential data input. Channel O0 (odd) |
| 2 | RXO0+ | Positive LVDS differential data input. Channel O0 (odd) |
| 3 | RXO1- | Negative LVDS differential data input. Channel O1 (odd) |
| 4 | RXO1+ | Positive LVDS differential data input. Channel O1 (odd) |
| 5 | RXO2- | Negative LVDS differential data input. Channel O2 (odd) |
| 6 | RXO2+ | Positive LVDS differential data input. Channel O2 (odd) |
| 7 | GND | Ground |
| 8 | RXOC- | Negative LVDS differential clock input. (odd) |
| 9 | RXOC+ | Positive LVDS differential clock input. (odd) |
| 10 | RXO3- | Negative LVDS differential data input. Channel O3(odd) |
| 11 | RXO3+ | Positive LVDS differential data input. Channel O3 (odd) |
| 12 | RXE0- | Negative LVDS differential data input. Channel E0 (even) |
| 13 | RXE0+ | Positive LVDS differential data input. Channel E0 (even) |
| 14 | GND | Ground |
| 15 | RXE1- | Negative LVDS differential data input. Channel E1 (even) |
| 16 | RXE1+ | Positive LVDS differential data input. Channel E1 (even) |
| 17 | GND | Ground |
| 18 | RXE2- | Negative LVDS differential data input. Channel E2 (even) |
| 19 | RXE2+ | Positive LVDS differential data input. Channel E2 (even) |
| 20 | RXEC- | Negative LVDS differential clock input. (even) |
| 21 | RXEC+ | Positive LVDS differential clock input. (even) |
| 22 | RXE3- | Negative LVDS differential data input. Channel E3 (even) |
| 23 | RXE3+ | Positive LVDS differential data input. Channel E3 (even) |
| 24 | GND | Ground |
| 25 | NC | For LCD internal use only, Do not connect |
| 26 | NC | For LCD internal use only, Do not connect |
| 27 | NC | For LCD internal use only, Do not connect |
| 28 | Vcc | +5.0V power supply |
| 29 | Vcc | +5.0V power supply |
| 30 | Vcc | +5.0V power supply |
Handling Precautions:
1.Always follow the correct power sequence when LCD module is connecting and operating. This can prevent damage to the CMOS LSI chips during latch-up.
2.It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will be damaged.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.