1K Primer Surface Automotive Base Coat Flat Grey Metallic Red Dark Green Car Paint
Iridescent Orange Metallic White Car Paint Automotive Base Coat
Automotive paint Basecoat:
- Solid paints have no sparkle effects except the color. This is the easiest type of paint to apply, and the most common type of paint for heavy transportation vehicles, construction equipment and aircraft. It is also widely used on cars, trucks, and motorcycles. Clear coat was not used on solid colors until the early 1990s.
- Metallic paints contain aluminium flakes to create a sparkling and grainy effect, generally referred to as a metallic look. This paint is harder to manage than solid paints because of the extra dimensions to consider. Metallic and pearlescent paints must be applied evenly to ensure a consistent looking finish without light and dark spots which are often called "mottling". Metallic basecoats are formulated so that the aluminium flake is parallel to the substrate. This maximises the "flop". This is the difference in the brightness between looking perpendicularly at the paint and that at an acute angle. The "flop" is maximised if the basecoat increases in viscosity shortly after application so that the aluminium flake which is in a random orientation after spraying is locked into this position while there is still much solvent (or water) in the coating. Subsequent evaporation of the solvent (or water), leads to a reduction in the film thickness of the drying coating, causing the aluminium flake to be dragged into an orientation parallel to the substrate. This orientation then needs to be unaffected by the application of the clear coat solvents. The formulation of the clear coat needs to be carefully chosen so that it will not "re-dissolve" the basecoat and thus affect the orientation of the metallic flake but will still exhibit enough adhesion between the coatings so as to avoid delamination of the clear coat. A similar mode of action occurs with pearlescent pigmented basecoats.
Basic raw materials:
- Autobase : Physical drying binders
- Autobase Blending Agent: Physical drying binders
| Item No. | Product Name | Item No. | Product Name |
| 301 | 1K Transparent White | 508 | Moderate Thick Silver |
| 302 | 1K Extra White | 509 | Coarse Silver |
| 303 | 1K Super White | 510 | Extra Coarse Silver |
| 311 | 1K Jett Black | 511 | Superfine Bright Silver |
| 312 | 1K Pure Black | 512 | Fine Bright White Silver |
| 313 | 1K Extra Black | 601 | Super Fine White Pearl |
| 314 | 1K Bluish Black | 602 | Super White Pearl |
| 315 | 1K International Black | 603 | Red Pearl |
| 316 | 1K Extra Bluish Black | 604 | Fine Red Pearl |
| 321 | 1K Scarlet Red | 605 | Interference Red Pear |
| 322 | 1K Dark Purple Red | 606 | Antique Copper Pearl |
| 323 | 1K Bright Red | 607 | Fine Copper Pearl |
| 324 | 1K Maroon Red | 608 | Blue Pearl |
| 325 | 1K Rose Red | 609 | Fine Blue Pearl |
| 1K-39 | 1K Transparent yellowish red | 610 | Golden Pearl |
| 326 | 1K Transparent Red | 611 | Yellow Pearl |
| 327 | 1K Transparent lron Red | 612 | Golden Yellow Pearl |
| 328 | 1K Orange Red | 613 | Purple Pearl |
| 331 | 1KLemon Yellow | 614 | Green Pearl |
| 333 | 1K Transparent Yellow | 615 | Purplish Red Pearl |
| 334 | 1K Bright Yellow | 616 | Fine White Pearl |
| 335 | 1K Transparent Iron Yellow | 617 | White Pearl |
| 336 | 1K Moderate Yellow | 618 | Super White Coarse Pearl |
| 337 | 1K Earthy Yellow | 619 | Orange Red Pearl |
| 338 | 1K Iron Red | 620 | Bright Red Pearl |
| 339 | 1K Purple Red | 621 | Crystal White Pearl |
| 341 | 1K Standard Blue | 622 | Crystal Blue Pearl |
| 342 | 1K Greenish Blue | 623 | Crystal Green Pearl |
| 343 | 1KUltramarine Blue | 624 | Crystal Red Pearl |
| 344 | 1K Bright Blue | 625 | Crystal Golden Pearl |
| 345 | 1K Blue Lake | 626 | Crystal Brown Pearl |
| 346 | 1K Purple Blue | 633 | Chameleon Yellow x Red x Purple Blue |
| 347 | 1K Cyan | 634 | Chameleon Gold x Green x Blue |
| 351 | 1K Bluish Green | 635 | Chameleon Blue x Green x Purple |
| 352 | 1KGloden Green | 636 | Bright green pearl |
| 353 | 1K Olivedark Green | 637 | Bright red pearl |
| 362 | 1K Purple | 638 | Hongzhongyin |
| 371 | 1K Transparent Brown | 639 | Golden brown Silver |
| 501 | Superfine Silver | 640 | Blue Glitter Silver |
| 502 | Fine Silver | 641 | Orange red pearl |
| 503 | Fine White Silver | 642 | Brilliant blue pearl |
| 504 | Fine Bright Silver | 506 | Moderate Silver |
| 505 | Moderate Bright Silver | 507 | Moderate White Silver |
Application method
| spray gun | Gravity gun | Suction gun |
| gun nozzle: 1.2mm, gun pressure: 2.0-3.0 MPa |
gun nozzle: 1.5mm, gun pressure: 2.0-3.0 Mpa |
|
| substrate | dry 1K primer surface with smooth effect | |
| Paint preparation | 1k paint- thinner-EX10/EX20/EX30 |
|
| mix ratio | 1 : 1 (base paint : thinner) | |
| spraying layers | 2-3 coats | |
| flash off time | 3-5 mins , 20-25℃ | |
| surface dry time | 15-20mins | |
| Time to Polish | 1h, P1000 sanded paper | |
| Relationship between drying temperature and time of 1K base coat | ||
| Tenmperture | Surface Drying time | Time to Polish |
| 25℃ | 10-15 mins | 1 hour |
| 35℃ | 5-10 mins | 40 mins |
| 60℃ | 3-5 mins | 15 mins |
Image Display:
Safety instructions :
- For professional use only.
- KEEP OUT OF REACH OF CHILDREN. WARNING! CONTENTS ARE FLAMMABLE.
- VAPOR AND SPRAY MIST IS HARMFUL.
- SKIN AND EYE IRRITANT.
- Do not handle the Prospray products until the Material Safety Data Sheets have been read and understood in their entirety.
- Ensure that all employees are trained on Material Safety Data Sheets and all chemicals with which they come into contact.
- Wear protective clothing, gloves and eye safety with a side shield.
- This data sheet information is given in good faith but without warranty.
- The information contained herein represents the current state of our knowledge and is intended as a guide to our products and their uses;
- it is not intended for insurance of certain product properties or of their specific applications.
- Follow all warnings on product labels.
Storage :
Keep in a tightly covered container and in a dry and ventilated environment,avoiding exposure in sun directly.Temperature above 10℃ is recommended,between 15 and 30 ℃ optimal.
Company Information:
Henghui Chemical Coating Co.,Ltd which is engaged in the development, production, and sale of automobile paint, wood paint & putty, was established in 1996. And began to export since 2002.
Our sales network covers China, Southeast Asia, Africa, the Middle East, Australia, Europe and America. Now, we founded famous brands "Kingfix coating" and "MJ COAT". Our company has now become an integrated painting company with multiple products and great brand effect in the industry. welcome to join us. We can become your Kingfix agency in your country.
1. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
2. why should you buy from us not from other suppliers?
HENGHUI CHEMICAL COATING CO., LTD. was established in 1996, the company covers an area of 50,000 square meters, has a staff of 220 people, with annual sales of more than million.We sell over 28000 tons in 2017. The sales amount over USD 20 million.
Producton Capacity
Our Team
In addition to a full set of advanced automated production equipment, and sophisticated testing equipment, the company also has a management team and production team with many years of experience in the production of coatings. We are strict with control of each process, and dedicated to the perfect product.
Our Exhibition
All series of products of “MJ COAT” and “KINGFIX COAT” conform to the National standard and European standard, which are high quality, non-toxic, and healthy environmental coating. After more than 21years of development, HENGHUI Coating has become one of the completely diversified and influential enterprises.
Our Certificate
In recent years, we won many honors, and has passed ISO14025, ISO9001 Quality System Certification, Ten Ring Mark, 3C Certification, China environmental protection products and other certifications. High quality and reliable products are derived from Henghui’s technological innovation and strict management.
FAQ:
Q1: Are you trading company or manufacturer ?
A: Yes, we are. Our facotry is in Shaoguan, Guangdong, China. It takes one and half hour by car from Guangzhou airpoat to our factory.
Q2: Do you provide samples ? is it free or extra ?
A: According to the actual situaton, we can provied free samples.
Q3: Can you manufacturer the paint under my brand and my logo?
A: We could help to pack and deliver under your brand, but we would require some license from you and we have requirement for the order quantity..
For details, please contact us to get our OEM Cooperation Terms.
Q4: Is your car paint suitable for our weather?
A: This has been tested by our national wide customers and oversea markets. What’s more, we can adjust the formula as per the climate condition of each local market.
Q5: Can you do customized colors?
A:Yes, we can, but we need the color sample from buyers. Or maybe you can send a picture for us for reference.
Q6: What free advertising materials would you give us if I send you an order? And how many pieces would you give free?
A:We could arrange free advertising materials such as mixing machine, balance/scale, spray gun, display racks, T-shirt, cap, CDs, posters, tinting maps,TDS, color reference cards, mixing rulers…etc.
While the quantity we could offer free is basing on your order amounts.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.






