Two Component High Solid Content High Brightness PU Wood Paint

Description:

Polyurethane Recoatable Finish is a two-component, high build, aliphatic acrylic polyurethane coating, which is to be used as topcoat in atmospheric environments. It provides a durable gloss and colour retention topcoat finish, which also incorporates a wide range of performance characteristics. It offers good operational performance including adhesion, abrasion scratches, impact, humidity condensation and splashes of mild chemicals, when applied over suitable and properly primed surfaces

Product Features:

• High Transparency 
• Fungus Resistance 
• Anti-Scratch 
• Weathering Resistance 
• Flexible 
• Prevent Water Penetration

Composition:

Pigment : Transparent Oxide

Binder : Alkyd modified polyurethane

Thinner : General Purpose Thinner

Recommended Coating System:

• Sealer / Primer : Not applicable
• Top Coat : 1 Pack PU Timbercoat: 2 - 3 coats
• Finish colour could vary depending on type and colour of the wood being applied.Thicker paint film will also give a darker colour.

Surface Preparation:

• First, remove all unstable paint film, dust, oil, wax and other foreign matters.
• Sand using sandpaper Grade #80 or #100 to smoothen the surfaces as it will enhance the paint adhesion on the surface.
• If necessary, fill the wood grains with appropriate filler and then smoothen it out again with sandpaper.
• Ensure that the surface is clean, dry and free from wax before applying the first coat.
• Allow the paint to dry before applying the subsequent coat(s).
• If there are presence of raised fibre particles from the surface, remove it by light sanding before subsequent coating(s) for better finishing.

Company profile:

1.Our factory was established in 1996.
2.We specialize in the production of automotive paint and furniture.
3.Or your product has 3C certificate, CE certificate and ISO 9001 certificate.
4.We have a strong sales team and after-sales team to make every customer enjoy high quality service.

5.The factory is located in an area of more than 50,000 square meters, with a larger team of analysis and development and a quality monitoring team.