Paste State Car Body Filler High Adhesion Quick Dry Non Deformable
High Adhesion Easy To Scratch Quick Dry Non-Shrinkable Car Body Filler
Description:
- MJ-Coat car putty Filler, the latest product in our line of advance technology lightweight body fillers.
- MJ-Coat Super Smooth Filler contains both micro-perfecting surface technology to reduce the chance of pinholes as well as adhesion booster for maximum adhesion to auto body surfaces.
- MJ-Coat car putty Filler, is easy-to-spread and apply and levels well as a result of lower surface tension.
- With its super smooth application, your sanding times will be greatly reduced; less sanding = less time.
- With MJ Filler you can eliminate the glazing putty step of auto body repair.
DIRECTIONS OF USE
Use for filling and repair of minor bodywork up to ¼”, such as dents, dings, hail damage, and small holes.
SURFACE PREPARATION:
1. Clean surface. Remove all dirt, oil, grease and wax with a cleaning solvent such as #1240-1 Wax, Grease & Silicone Remover.
2. Make sure surface is dry before repairing.
3. Use 40-80 grit discs to featheredge paint for good mechanical adhesion.
MIXING:
- For best results, bring filler and provided hardener to room temperature (minimum temperature 68ºF).
- Knead product in pouch and hardener tube before use.
- Place a 4” diameter puddle of filler on a clean mixing surface; we recommend a non-absorbent plastic mixing board.
- Add a ribbon of cream hardener from edge-to-edge across the center of the filler puddle (puddles larger than 4” will require additional hardener); or measure hardener at 2% by weight of filler – a 100:2 ratio. Mix thoroughly with a plastic spreader, using a folding motion, until uniform color is achieved.
- At room temperature (75ºF) approximate setting time is 3-5 minutes.
DRYING/SANDING TIMES
- Allow the application of filler to cure 20 to 30 minutes.
- Sand with 80 grit sand paper and featheredge with 180 grit sandpaper or finer.
- Wait 1 hour before painting.
- Drying time depends on temperature and amount of hardener used.
- Optional: Apply a very thin layer of MJ-coat Glazing & Spot Putty to fill pinholes or small imperfections if necessary.
Company Information
Our Team
Our Exhibition
Our Certificate
FAQ:
Q1: Are you trading company or manufacturer ?
A: Yes, we are. Our facotry is in Shaoguan, Guangdong, China. It takes one and half hour by car from Guangzhou airpoat to our factory.
Q2: Do you provide samples ? is it free or extra ?
A: According to the actual situaton, we can provied free samples.
Q3: Can you manufacturer the paint under my brand and my logo?
A: We could help to pack and deliver under your brand, but we would require some license from you and we have requirement for the order quantity..
For details, please contact us to get our OEM Cooperation Terms.
Q4: Is your car paint suitable for our weather?
A: This has been tested by our national wide customers and oversea markets. What’s more, we can adjust the formula as per the climate condition of each local market.
Q5: Can you do customized colors?
A:Yes, we can, but we need the color sample from buyers. Or maybe you can send a picture for us for reference.
Q6: What free advertising materials would you give us if I send you an order? And how many pieces would you give free?
A:We could arrange free advertising materials such as mixing machine, balance/scale, spray gun, display racks, T-shirt, cap, CDs, posters, tinting maps,TDS, color reference cards, mixing rulers…etc.
While the quantity we could offer free is basing on your order amounts.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.