Grade:VF790

Product: Hot Melt Adhesive Resin For Aluminum Plastic Panel And Heat Insulation Panel

Descriptions

Traditional hot melts have several limitations; they are temperature sensitive, that is, they soften at elevated temperatures and consequently loose strength and at low temperatures, they become brittle. They are also susceptible to creep which can cause joint failure when exposed to stress. Most hot melt adhesives are applied quite hot at temperatures between 100 to 230°C (212 to 450°F), and therefore, cannot be used on temperature sensitive substrates. Another draw back is the short open time, which is the time before the liquid adhesive solidifies.

VF790 is a maleic anhydride and vinyl acetate functionalized polyethylene mixture, easy to form film, with excellent processability and adhesive strength.

Mechanical Properties

Thermal Properties

Note:The datas is used for referential purpose only, not for quality commitment.

Advantages

1. Good film forming performance, can be formed into 0.02 ㎜ thick film;
2. High adhesive strength, good durability, excellent adhesive interface performance, showing the interface adhesive cohesion energy destruction;
3. Can withstand a certain acid, alkali, salt spray and other chemical solvent corrosion;
4. Strong adaptability, can meet the needs of high-speed production;
5. Good weather resistance, adapt to the climate temperature change environment, can be outdoor use.

Chemical Structure

Composition: Maleic Anhydride and Vinyl Acetate functionalized polyethylene mixture.

Application

VF790 is widely used as binder for aluminum plastic panel and heat insulation panel.

Statement: the above processing technology shall be different according to different conditions such as product size, mold design and processing equipment specification, and the details shall be adjusted according to the actual situation.