Female 10A Pogo Test Probes High Precision DIP Type Spring Loaded Pogo Pin

Price Negotiable

Price: Negotiation

MOQ: 30K

Delivery Time: 17-22 Days

Brand: TX

Product Description

10A High Current DIP Type Spring Loaded Pogo Pin

Characteristics:

1. Female pogo pin connector, male pogo pin connector,

2. Free samples with high class precision, 0.01mm precision

3. High recycling, Large Current ,Low MOQ, Low-Resistance

4. Standard & Non-Standard Pogo pin connector

5. OEM / ODM , Can be custom Designed

6. One Row, two rows, three rows

7. Surface Mount Soldering, Double Head, Flat Head

8. Waterproof

1. PLATING

1.1) Plunger: Brass C3604,3~50 micro inch Au over 50~120 micro inch Ni;

1.2) Barrel: Brass C3604,3~50 micro inch Au over 50~120 micro inch Ni;

1.3) Spring: SUS304, 1~3 micro inch Au;

2. Rated voltage (Per Contact): 12 V;

3. Rated Current (Per Contact): 1.0A-40.0 A;

4. Insulation Resistance: 100MΩ Minimum;

5. Dielectric Withstanding Voltage: 100VRMS AT 60HZ;

6. Contact Resistance: 50 mΩ maximum before test and 60mΩ maximum after test at Pogo pin working stroke;

7. Recommended Working Stroke & Force:

7.1) Spring Force:>=30gf ;

8. Mechanical life:

8.1) Mechanical life: 30,000~100,000 Cycles;

9. Working Temperature Range:-30~85℃;

10. Salt Spray: 48 hours;

Structure	Ball beads structure	Sloping structure	Perforated structure	Claw structure
Contact impedance	≤ 10mΩ	≤ 30mΩ	≤ 50mΩ	≤ 5mΩ
Long service time	10000+	10000+	10000+	500+
Recommended working current	10A max	10A max	10A max	10A max
Main application areas	Mainly used for charging and condition with certain requirements for vibration and shock	Mainly used for charging or signal transmission of Consumer electronics	Mainly used for signal transmission or grounding antenna,etc.	Mainly used high-frequency,anti-instantaneous,the situation which high-reliability is required,such as base stations,military industries,vehicles.
Remarks	The beads increase the internal contacts,the contact is more stable,and the more needle space is required	The most commonly used structure on the market	The space is smaller,but the contact is not stable,the current is easy to run through the spring,and it is not recommended for charging	The needle and the needle tube have multiple contacts to increase the contact stability