Astm A36 St37 1020 1040 Carbon Steel Plate Sheet 0.5 Mm Mild Steel Sheet
Top Quality Astm A36 St37 1020 1040 Carbon Steel Sheet Plate
|
Cold rolled steel plate used in parts forming requires large plastic deformation degree of material, surface should not have wrinkle, crack and other parts. Different grades of steel plates are used for different parts. For example, Japanese automobile steel plate standards are divided into three categories, the first category (SPCC) is ordinary cold rolled steel plate, usually rolled by boiling steel, the second category (SPCD) is calenderized steel plate, the third category (SPCE or SPCEN) is deep drawn cold rolled steel plate. |
Specfications
Chemical Composition
| Specification | Grade | Chemical Composition(wt%) | ||||||
| C | Mn | Ni | Cr | Mo | Ti | |||
| ASTMJIS | 316L/022Cr17Ni12Mo2 | ≤0.03 | ≤2.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | - | |
| JIS | SUS316L | ≤0.03 | ≤2.0 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 | - | |
| ASTMJIS | 316Ti/SUS 316Ti | ≤0.08 | ≤2.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | 5*(C+N)-0.7 | |
Properties
| Spec | Grade | Mechanical Property | Physical Property | ||||
|
Y.S (N/MM2) |
T.S (N/MM2) |
EL (%) |
HRB |
Specific Heat (J/g℃) |
Modulus of Elasticity (KN/mm2) | ||
| ASTM/GB | 316L/022Cr17Ni12Mo2 | ≥170 | ≥485 | ≥40 | ≤95 | 0.5 | 193 |
| JIS | SUS316L | ≥175 | ≥480 | ≥40 | ≤90 | 193 | |
| ASTM | 316Ti | ≥205 | ≥515 | ≥40 | ≤95 | 0.5 | 200 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.