Big Spangle Prepainted Roofing Sheet Customer Require 500 Square Meters
|
Installation work
The correct way to lay the tiles
1.Overlapping type (applicable to the roof with length ≦ 15M)
2.Staggered (applicable to roofs with a length of ≧ 15M)
two. Correct use of special nails
4.The special nail must be hit in the middle of the tile bone to have a waterproof effect.
5.The fixed interval of special nails is 50CM～100CM horizontally and vertically (preferably 4/㎡).
6.Special nails must be hit from the lower end of the tile to the roof to have a beautiful, sealed and neat effect.
|
Correct use of special nails
1.The special nail must be hit in the middle of the tile bone to have a waterproof effect.
2.The fixed interval of special nails is 50CM～100CM horizontally and vertically (preferably 4/㎡).
3.Special nails must be hit from the lower end of the tile to the roof to have a beautiful, sealed and neat effect.
Install weather strip ridge tile eaves cover
1. Divide the sealing strip into two halves, press the roof tile according to the tile type and cover the ridge tile with special nails.
2. At the junction of the side tiles, cover the ridge tiles directly after sealing with cement, and finish with a small tile file at the bottom of the ridge tiles.
3. The lower end of the tile, that is, the eaves, is directly installed with the eaves cover and fixed with screws. 4.
At the junction of the ridge and tile, the control interface is trimmed with scissors and then overlapped and sealed with glass glue.
Protruding part waterproof treatment
First make a V-shaped material, you can choose different materials and specifications, depending on the actual situation. After installing the water connection at the bottom, lay color steel tiles on it.
Inclined surface connection installation
It refers to the construction of installing water-receiving treatment at the bottom after the two roof tiles are cut by angle and length. First, install the water-receiving material (ie gutter) under the tile, and then finish with waterproof adhesive or cement.
|
|
| Product Name |
30 32Gauge Corrugated Steel Roofing Sheet
|
|
Main market
|
Southeast Asia, South Asia, Middle East, Europe, Middle
|
|
Surface
|
2B / BA /NO.1/ NO.4/HL/8K/6K
|
|
Main market
|
Southeast Asia, South Asia, Middle East, Europe, Middle& |
|
Zinc Coating
|
30g to 275g/m2
|
| Delivery time |
Z30-Z140 AZ20-AZ160 |
|
Length
|
Coil or as customer's request
|
|
MOQ
|
500 Square Meters |
FAQ:
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up.
Q: What's your product package?
A: First packed with plastic film, second covered with kraft paper to avoid wet, thrid covered with iron sheet then tie up with packing strap
Q:Are you manufacturer or trader?
A: Yes, we are manufacturer and trader, and if you need other special product, we will do our best to help you, so that we can build a long-term business relationship.
Q: which kinds of products do you have advantages?
A:Our advantage products are GI , GL , PPGI coils/strip/corrugated roofing sheet.
Q:How to pack the products?
A:The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q:How long does it take to get the product if I place an order?
A: With the process of your requirements, we will pack and deliver in 3-7 days. If it is by sea shipment, it will take 15-45 days depending on different locations.
Q: What kind of terms of payment?
A: T/T, L/C, Western Union,PayPal are available.
Q:How long does your delivery time take?
A:In general, our delivery time is within 30-45 days, and may be delayed if the demand is extremely large or special circumstances occur.
