Lithium Ion Battery Roller Pressing Machine Continuous Hydraulic Calendaring Machine 

Equipment description:
1 . Equipment function: Used in the rolling process of lithium-ion battery electrode production to realize the continuous rolling production of battery electrode coils and meet the specifications and quality required by the battery electrode process;
2. Equipment composition: mainly includes unwinding device, belt connecting device, edge cutting device, dust removal device, heating roller press, rewinding device, hydraulic system, drive control system, roll changing device.

The main performance indicators of the equipment:
1. Overall dimensions of the continuous rolling machine (length*width*height): about 4.0×2.0×1.8 m
2. The total weight of the machine: about 4.2 tons
3. Rolling speed: 0.5-9m/min
4. Maximum pressure between rollers: 70T

Equipment installation and use requirements:
1.The loading request for ground:≥3T/m2 ,flatness ±2mm/㎡
2. Power supply: 380V, 50Hz three-phase five-wire system
3. Total power: 38kW/set (including 10% safety factor)
4. Compressed air: pressure 0.2～0.7MPa, flow rate: 20L/min, the outer diameter of the interface pipe is 8mm
5. Circulating cooling water: pressure 0.2～0.3MPa, flow rate: 50L/min, interface size 20mm
6. Use environment: temperature range 0～+45℃ relative humidity: ≤50%

Equipment description:
1 . Equipment function: Used in the rolling process of lithium-ion battery electrode production to realize the continuous rolling production of battery electrode coils and meet the specifications and quality required by the battery electrode process;
2. Equipment composition: mainly includes unwinding device, belt connecting device, edge cutting device, dust removal device, heating roller press, rewinding device, hydraulic system, drive control system, roll changing device.

The main performance indicators of the equipment:
1. Overall dimensions of the continuous rolling machine (length*width*height): about 4.0×2.0×1.8 m
2. The total weight of the machine: about 4.2 tons
3. Rolling speed: 0.5-9m/min
4. Maximum pressure between rollers: 70T

Equipment installation and use requirements:
1.The loading request for ground:≥3T/m2 ,flatness ±2mm/㎡
2. Power supply: 380V, 50Hz three-phase five-wire system
3. Total power: 38kW/set (including 10% safety factor)
4. Compressed air: pressure 0.2～0.7MPa, flow rate: 20L/min, the outer diameter of the interface pipe is 8mm
5. Circulating cooling water: pressure 0.2～0.3MPa, flow rate: 50L/min, interface size 20mm
6. Use environment: temperature range 0～+45℃ relative humidity: ≤50%