CE Certificated SF-25KW Super Audio Induction Hot Forging Machine For Hot Bearing, S.S Ring

 Features:

1. Precise and fast heating for work pieces.
2. Non-Contact is the biggest Features for induction heating machine, no flame, more safty to operate the machine. 
3. Continuously working, 24 hours non-stop with Max Power.
4. Less interference to others equipment in workshop (Proved by CE).

5. Double digital Screen display, better to know the working performance of the machine!

6. Infineon IGBT and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
7. 100% Duty cycle, continuous working is allowed at maximum power output.
8. Simple to install, Installation can be done by unprofessional person very easily;

9. Energy Saving Up to 20-30% compare with SCR machine.

10. Diode Rectification Technology Make sure high power factory—0.98.

11. Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.

12. The machine has the Isolation Transfromer, will be very safe operate our machine.

Technical Parameter:

Working Principle: (What is induction heating? How does induction heating work?)
During induction heating eddy currents are induced in an electrically conductive metallic workpiece by an alternating electromagnetic field. These are converted into heat by magnetic loss. - Or, simply put, the metal heats up due to the current flow produced in the workpiece. This enables induction heating to introduce heat directly into the workpiece rather than through connectivity from an external source such as heating with a flame or in a furnace. This process thus achieves a very high degree of efficiency. Additionally, heating can also be accomplished passing through non-conductive materials. The surrounding area is only heated indirectly.

Application:

1. Heating (hot forging, hot fitting and smelting): Steel bar, Steel plate, Copper and Brass Bar, Cooper Plate and so on.
2. Heat Treatment (surface quench): Gear, Pipe, Shaft, Rolling.

3. Welding (braze welding, silver soldering and brazing):

A.Welding of various hardware cutting tools, such as diamond tool, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit.

B. Welding of various hardware mechanical gadget: Silver soldering and brazing of metals of the same variety or different varieties, such as hardware toilet and kitchen products, refrigerating copper fitting, lamp decoration fitting, precision mold fitting, hardware handle, eggbeater, alloy steel and steel, steel and copper as well as copper and copper. 
4. Annealing (tempering and modulation):

Advantage

1. Using the third generation Infineon IGBT.

2. DELIXI Isolation Air Switch

3. All screws in our machine are stainless steel.

4. Phase Bridge (Germany IXYS)

5. More than 22 Years Expriences, good quality control and good performance.