MF-120KW Induction Forging Bar Stock Machine Industrial Process
MF-120KW Induction Forging bar Stock machine industrial process:
Specification:
| Type | HF-120KW |
| Work power | 380V/ 415V/ 440V /480V *3Phase 50-60HZ |
| Work Voltage | 340V-480V AC |
| Output power | 120KW |
| Input current | 180A |
| Working Frequency | 30-80KHZ |
| The flow rate of cooling water | 0.12-0.3Mpa 14L/Min |
| Water temperature protection point | 40℃ |
| Duty cycle | 100% (40degree room temperature) |
| Weight |
Main parts:135KGS Transformer Parts: 115KGS |
| Size |
Main Part: 830*500x1100 mm Transformer :640x360x590 mm |
Features:
1. Non-contact Heating is the biggest Characteristic of the induction heating.
2. High Frequency, Heating is fast, good for quenching all kinds of shaft, pipe, gear, lead Guide, Sprock and so on.
3. Infineon module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
4. 100% Duty cycle, continuous working is allowed at maximum power output.
5. Simple to install, Installation can be done by unprofessional person very easily;
6. Double digital Screen display, better to know the working performance of the machine!
7. Energy Saving Up to 20-30% compare with SCR machine.
8. Diode Rectification Technology Make sure high power factory—0.98.
9. Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
Application:
Advantage
1. Using the third generation Infineon IGBT.
2. DELIXI Air Switch
3. All screws in our machine are stainless steel.
4. Phase Bridge (Germany IXYS)
5. Water Temperature and water Pressure meter in the machine,double protection for the machine.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.