LPC844M201JBD48 Microcontroller MCU 32-Bit 30MHz ARM Cortex-M0+ LPC84x Microcontroller IC
Based on the Arm® Cortex®-M0+ core, LPC844M201JBD48 is a low-cost, 32-bit MCU family operating at frequencies of up to 30 MHz. The LPC84x MCU family supports up to 64 KB of flash memory and 16 KB of SRAM.
This family features exceptional power efficiency in the low-current mode using the FRO as the clock source. The peripheral complement includes a CRC engine, four I2C-bus interfaces, up to five UARTs, up to two SPI interfaces, capacitive touch interface (enablement coming in Q3), one multi-rate timer, self-wake-up timer, SCTimer/PWM, one general purpose 32-bit counter/timer, a DMA, one 12-bit ADC, two 10-bit DACs, one analog comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine, and up to 54 general-purpose I/O pins.
| Core | ARM Cortex M0+ |
|---|---|
| Program Memory Size | 64 kB |
| Data Bus Width | 32 bit |
| ADC Resolution | 12 bit |
| Maximum Clock Frequency | 30 MHz |
| Number of I/Os | 42 I/O |
| Data RAM Size | 8 kB |
| Supply Voltage - Min | 1.8 V |
| Supply Voltage - Max | 3.6 V |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +105 °C |
| Data RAM Type | SRAM |
| Interface Type | I2C, SPI, USART |
| Moisture Sensitive | Yes |
| Number of ADC Channels | 12 Channel |
| Number of Timers/Counters | 7 Timer |
- Low power, simple, flexible and small form factor
- Low-power, 30 MHz Cortex-M0+ core with advanced power optimization
- Advanced peripherals for full range of timing functionality and design flexibility
- Serial connectivity and small footprint in popular packages
- 64 kB Flash with small 64 B page size suitable for EEPROM emulation
- 16 kB RAM with Logic for Bit banding across all of SRAM
- Exceptional power efficiency in low-current mode using FRO as clock source
- Five power modes with power profile APIs for simple runtime power optimization
- Full range of timing features from basic to advanced (SCTimer/PWM)
- Accurate 1.2-Msps ADC: 12 ch, 12-bit ideal for oversampling
- 4 I2C, 2 SPI, 5 UART interfaces
- 54 GPIO with switch matrix, supporting input pattern match engine
- 25-ch DMA, 2 ch 10-bit DAC, capacitive touch interface
- Supported by MCUXpresso SDK, IDE and Config Tools
- Automotive: Heating Ventilation and Air Conditioning (HVAC)
- Consumer: Air Conditioning (AC), Hearables, Major Home Appliances, Robotic Appliance, Small and Medium Appliances, Smart Watch and Wristband
- Industrial: 3-Phase AC Induction Motor, Automatic Vehicle Identification, Brand Protection, Brushless DC Motor (BLDC) Control, Continuous Glucose Monitoring (CGM), Electricity Metering, General Avionics, Home Control Panel, In-Home Energy Display, Motion Control and Robotics, Permanent Magnet Synchronous Motor (PMSM), Power Grid Converter, Smart Power Socket, Solar Photovoltaic (PV) Energy Generation System, Transport Ticketing, Vital Signs Monitors
| Part Number | Package |
|---|---|
| K4UJE3Q4AA-TFCL | FBGA-200 |
| K4U6E3S4AB-MGCL | FBGA-200 |
| K4UBE3D4AB-MGCL | FBGA-200 |
| K3UH5H50AM-JGCR | FBGA-432 |
| ISSI20R11HXUMA1 | PG-DSO-8 |
| ISSI30R12HXUMA1 | PG-DSO-16 |
| 4DIR2400HAXUMA1 | PG-DSO-16 |
| CY15V116QSN-108BKXI | FBGA-24 |
| 4DIR0400HAXUMA1 | PG-DSO-16 |
| S70KL1282DPBHV023 | 24-FBGA |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.