Full Automatic Double Filling Machine ( Semi-Solid Cell / Solid Cell ) , 300 Type

Function Description

• This equipment is mainly used for flexible packaging of lithium ion semi-solid/solid state battery automatic suction vacuum packaging. Its functions include: Vehicle loading, automatic feeding (tray box of a whole box of material, from pulling material, the cartridge box feeding, etc according to the need to select a battery into the cavity before positioning principle lateral sealing side a strip broken vacuum encapsulation everything except the air pocket a secondary fine sealing side voltage test ten percent at one essence cut on the left the right side (single or double flanged folding according to need to choose a little glue (according to the need to select a hot side a batteries Thickness test (according to need to choose) one scan code, one weighing, one NG sorting, one automatic material collection

  (Tray vehicle feeding, pull-strip feeding, clip feeding, blister tray, etc., can be selected according to needs)

Technical Feature

• The machine hands the material to the sealing cavity, and automatically closes the cavity, punctures, extracts and encapsulates after the completion of feeding
• Edge cutting accuracy ±0.15mm
• Pre-cut air bag function to remove excess air bag edges to avoid cross contamination of residual electrolyte on air bag
• The battery was repositioned twice before packaging, and the packaging position accuracy was ±0.15mm
• Battery short circuit test function after packaging, NG material is not tested after the process, feeding level automatically do not remove
• The head is separated from the bayonet, the head is easy to maintain
• The air bag edge and side sealing edge are respectively positioned at two stations and then removed to ensure edge cutting accuracy
• Cutter body can not repair mold use 500,000 times
• After folding, the hot edge of the battery is shaped, and the hot edge block is buffered to ensure that the battery is not damaged by clamping
• Weighing function after molding, weighing data and bar code binding input computer​

Technical Parameters