12Core 5M MPO MTP Cable Female 10MB Multi Mode OM4 Polarity A Low Insertion Loss
Product Description of MPO MTP OM4 Cable:
There are many types of MPO fiber connectors. In addition to the number of cores, there are single-mode, multi-mode, standard loss, and low-loss cores. And for 40G module or 100G module cores, are multi-mode cores, 40G for 8-core multi-mode cores, 100G for 20-core multi-mode cores, that is, a core is 10G, 8 core is 40G. Why not 80 gigabytes? Because 8 core inside, the signal is received have sent, receive signal 4 core, transmit signal 4 core, a core 10G, it is 40G, 100G of the same reason. If the 40G MPO fiber jumper is in the form of MPO-MPO, the 12-core MPO multi-mode core is generally used for production. If the 100G MPO fiber jumper is in the form of MPO-MPO, the 24-core MPO core is generally used for production. Unused channels are left blank
Features of MPO MTP OM4 Cable:
- Compliance with Telcordia GR-1435-Core Compliant
- US Conec MTP/Senko MTP/OPTICO MPO connectors are available
- High quality ferrule and accurate alignment by PIN and PIN hole
- Low insertion loss and high return loss
- High interchangeability and durability
- MPO fiber optic patch cord comes in many types and design blueprint can be provided quickly.
- Compliant with Telcordia GR-326-CORE, IEC and RoHS standards
- 100% 3D tested/End surface tested/Loss tested/Polarization before delivery
- MTP is optional.
Advantages of MPO MTP OM4 Cable:
- Easy management, high reliability, few fault points, fast wiring;
- Small size, the volume is smaller than the SC connector;
- High density, precise geometric design
- Support 12 to 72 core or even 96 core fiber connections.
Application of MPO MTP OM4 Cable:
- Connection of indoor to outdoor optical cable wiring equipment
- For internal connection applications of optical transceivers, 40G/100G QSFP, QSFP+ and other optical transceivers.
- Data Centre Infrastructures
- Wiring of local area network between different enterprise buildings
- Connection of optical links in optical active devices
- Optical fiber to the building (FTTB) application;
- Wiring in communication base station and distribution case
- Production and testing of optical devices
- Telecomunication Infrastructures
- LANs and WANs
- FTTx
- Optical fiber communication system, CATV and telecommunication network
![]()
Technical Specificaitons of MPO MTP OM4 Cable:
A.
| Cable Type |
12 Fiber |
24 Fiber |
48 Fiber |
72 Fiber |
144 Fiber |
| 1 Group |
2 Groups |
4 Groups |
6 Groups |
12 Groups |
| 12 Fibers per Group |
| Connector A |
12 MPO Connector (Male or Female) |
| Connector A Count |
1 |
2 |
4 |
6 |
12 |
| MPO/UPC or MPO/APC Connector |
| Connector A Breakout Length |
Various Lengths |
| Connector B |
12 Fiber MPO Connector (Male or Female) |
| Connector B Count |
1 |
2 |
4 |
6 |
12 |
| MPO/UPC or MPO/APC Connector |
| Connector B Breakout Length |
Various Lengths |
| Cable Jacket Type |
Plenum (OFNP) |
| Total Cable Length |
Various Lengths |
| Pin Out Configuration |
Method A, B or C |
| Fiber Mode |
Single Mode |
|
Multimode |
| 9-125um |
OM1-62.5/125um |
| |
OM2/OM3/OM4-50/125um |
| Insertion Loss |
0.35dB Max (0.15dB Typ.) |
0.35dB Max (0.15dB Typ.) |
| Return Loss |
≥60dB |
≥20dB |
| Cable Jacket Color |
Yellow |
Orange/Aqua/Magenta |
B.
| Type A |
MPO MTP(Female) |
Type B |
MPO MTP(Female) |
| Fiber Type |
OM4 50/125μm |
Wave Length |
850/1300nm |
| 400G Transmission Distance |
100m@850nm |
Fiber Type |
Corning ClearCurve |
| Polish Type |
APC-APC |
minimum bend radius |
7.5mm |
| Insertion Loss |
≤0.35dB(Typical Value 0.15dB) |
Return LossL |
≥20dB |
| Attenuation @850nm |
≤2.3dB/km |
Attenuation@1300nm |
≤0.6dB/km |
| Diameter of outer sheath |
3.0 mm |
Outer sheath material |
Plenum (OFNP) |
| Installation tensile load |
100N |
Long term tensile load |
50N |
| Operating Temperature |
-10°C ~ +70°C |
Operating Temperature |
-40°C~ +85°C |
Packaging:
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantit
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Q: Do you accept OEM or ODM?
A: Yes,we're factory. any your customized requirements we can do our best to help you realize.
