MPO MTP single mode fiber patch cord OM3 OM4 OS2 LSZH Harness Cable
MPO MTP Single Mode Fiber Patch Cord OM3 OM4 OS2 LSZH Harness Cable
MPO MTP To LC Breakout Cable OM3 OM4 OS2 LSZH Harness Cable
Overview of MPO to LC Breakout Cable
MPO/MTP to 4 duplex LC breakout cable fan out a single 40Gbps connection from a 40GBase-SR4 QSFP+ optical transceiver module to four 10Gbps LC SFP+ optical transceiver modules, while 12 fiber type is used in 10G networks. The MPO to LC breakout cable is also an economical solution for a smaller network environment in which you don’t need complicated equipment, because the MPO cable allows redistribution of various fibers into one round cable for short distance transmission, it offers 8, 12, 24 and up to 144 fibers for these applications. To protect the cable in the harsh environment, armored cable is available.
Features of MPO to LC Breakout Cable
- 0.35dB for MM, SM Low Loss (Elite) 0.35dB & Standard Loss 0.60dB
- 100% Interferometer Test
- IEC 61754-7 and TIA/EIA 604-5 Compliant for MPO/MTP interfaces
- Option for LSZH, OFNP or OFNR cable jacket.
- Pulling eyes are provided as an option to protect the fiber ends during installation.
- Save installation and reconfiguration time.
Applications of MPO to LC Breakout Cable
- Data Centre Infrastructure
- Storage Area Network – Fiber Channel
- Parallel Optics
- 10Gbps, 25Gbps and emerging 40Gbps, 100Gbps Protocol
Standard Compliance of MPO to LC Breakout Cable
- EIA/TIA-455-21A
- TIA 604-5 (FOCIS 5)
- Telcordia GR-326-CORE
- IEC61754-7
Specification of MPO to LC Breakout Cable
| Fiber Mode | Single Mode: OS2 9/125um |
| Multimode: OM4, OM3, OM2 50/125um,OM1 62.5/125um | |
| Connector A | MTP Female, Male; MPO Female, Male |
| Connector Brand | FSG MPO, USConec MTP |
| Connector B | LC, SC, FC, ST, E2000 |
| Polish Type | Single Mode: APC, UPC Muliti Mode: UPC |
| Cable Jacket | LSZH, PVC,OFNR, OFNP |
| Cable Type | Round, Ribbon |
| Cable Diameter | 2.0mm, 3.0mm , 4.0mm |
| Breakout | 0.9mm /2.0mm |
| Breakout Length | 0.3m, 0.5m, 1m and customize |
| Transmission Distance | OM4: 150m @40/100G, 400m @10G |
| OM3: 100m @40/100G, 300m @10G |
Technical parameter of MPO to LC Breakout Cable
| Fiber Mode | Single Mode | Multi Mode |
| Attenuation (dB/km) | ≤0.32 at 1310nm, ≤0.18 at 1550nm | ≤2.3 at 850nm, ≤0.6 at 1300nm |
| Insertion Loss (dB) | Elite: ≤0.35, Standard: ≤0.6 | Elite: ≤0.35, Standard: ≤0.6 |
| Return Loss (dB) | APC: ≥60, UPC: ≥50 | UPC: ≥20 |
| Connector Type | LC/SC/FC/ST | |
| Fiber Mode | Single Mode | Multi Mode |
| Insertion Loss (dB) | APC:≤ 0.3, UPC: ≤0.25 | UPC: ≤0.25 |
| Return Loss (dB) | APC: ≥60, UPC: ≥50 | UPC: ≥30 |
Assembly structure of MPO to LC Breakout Cable
Why choose Begate MPO to LC fanout cable?
The quality control system is to guarantee good quality products for shipment. To achieve this, Begate adopts strict quality control procedure and advanced equipment. We promise every item is 100% inspected and in highest quality.
- Low insertion loss 0.35dB for MM MPO
MTP MPO connector features the industry’s highest-precision thermoplastic ferrule, designed to 0.35dB Max. IL for MM types. For standard loss 0.6dB, elite less than 0.35dB
- 100% Interferometer Pass
Besides insertion loss, 3D geometry data affects the performances for MPO connector. For MT ferrule, it’s more complex than normal ceramic ferrule to control 3D, Begate tests 3D 100% strictly.
- Low Insertion Loss for LC connector
Begate uses 0.5um concentricity ferrule for LC connector and control the insertion loss is below 0.25dB.
Assembly line MPO to LC fanout cable
Ordering sequence information of MTP MPO to LC fanout cable
For example: MPO-male / Type A - APC / 12F - LC / UPC / MM / 2.0MM / 2m / 0.5m - LSZH cable 2.0mm
| 1 | Connector type 1# | MPO-Female, MPO-Male, MTP-Female , MTP-Male |
| 2 | Polarity | Type A, Type B, Type C |
| 3 | End face 1# | PC , APC |
| 4 | Fiber count | 2F, 4F, 8F, 12F , 24F |
| 5 | Connector type 2# | MPO/Female, MPO-male , FC, SC , ST, MU, LC , E2000 |
| 6 | End face 2# | PC,UPC, APC |
| 7 | Fiber Mode | SM (OS1, OS2), MM (OM1, OM2, OM3, OM4) |
| 8 | Cable Diameter (mm) | 2.0mm, 3.0mm, 4.0mm |
| 9 | Cable Length (m) | L= 1m, 2m, 3m, 4m ......customize |
| 10 | Pigtail Legnth (m) | L1= 0.5, 0.6, 1.0......customize |
| 12 | Cable Type (Fan-out Section) | Coated fiber (250um) |
| 0.9mm loose tube cable | ||
| 2.0mm PVC cable | ||
| 3.0mm PVC cable | ||
| LSZH cable 2.0mm | ||
| LSZH cable 3.0mm | ||
| No Fanout | ||
| Others, please specify |
Have questions?
Our informative and experienced representatives are ready to assist you with any questions that you might have, regarding your fiber optic network. We offer a superior selection of quality products as well as competitive pricing to help get your project completed and under budget. Thank you for visiting our website!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.