Overview:

Nanoparticle Linear Film Polarizers are made of silver particles that is embedded in sodium-silicate glass. As the silver particles absorbs incoming light radiation, the non-polarized light will be polarized linearly and the polarized light will either transmit or be blocked dependent on the polarizer orientation.

Nanoparticle Linear Film Polarizers offer superior performance compared to conventional polymer-based polarizers on a significantly better extinction ratio, higher damage threshold and a wider operating temperature range than

Each nanoparticle linear film polarizer will have their specific transmission axis which is marked by the dots present on the edge of the polarizer.

General Specifications of Nanoparticle Linear Film Polarizer:

Substrate Material	Glass
Dimension Tolerance	+0/-0.2mm
Surface Quality	60/40 scratch and dig
Clear Aperture	>90%
Parallelism	<20 arc minutes
Acceptable Angle	>20deg
Single Transmission for Parallel Polarized Beam	Refer to Tp in below table
Coating	None, upon to request
Damage Threshold	>25W/cm2 Continuous Pass >10W/cm2 Continuous Block

Standard Products of Nanoparticle Linear Film Polarizer:

Coating Graphs of Nanoparticle Linear Film Polarizer: