Custom Precision Stainless Steel Stamping Metal Parts With Powder Coated

The stamping technology and operation of stainless steel stamping parts have the following characteristics:

1. The working surface phase accuracy value of the working parts (convex and concave dies) designed and manufactured by the mold should be as small as possible. During the deep drawing operation, attention should be paid to keeping the surface of the working parts of the mold clean, and the dirt on the surface of the mold should be cleaned at any time.

2. The cutting edge of the blanking die should be kept sharp, and must be sharpened in time after use.

3. Using a lower stamping speed, it is recommended that the stamping degree be reduced by 1/3 compared with carbon steel in the blanking process.

4. Compared with carbon steel or non-ferrous metals, the value of the die gap for blanking stainless steel parts should be smaller, and the value of the die space and the radius of the convex and concave corners of the bending, deep drawing or forming stainless steel parts should be larger.

Application of stainless steel stamping parts:

1. Tensile parts in stainless steel stamping parts, mainly used in the automotive industry.

2. The punching forming in stainless steel stamping parts is mainly used in the auto parts industry.

3. Stainless steel stamping parts are used in electrical stamping plants.

4. Stainless steel stamping parts are used in the daily necessities industry, including some tableware and toiletries.

5. Stainless steel stamping parts can also be used in the household appliance industry, and many electrical components have stamping parts.

6. Stainless steel stamping parts can also be used in some high-precision industries, such as aerospace.

Product parameters: