Custom Sheet Metal Fabrication Stainless Steel Automotive Parts

Three key points of sheet metal fabrication:

1. After the stainless steel plate is bent, carry out surface treatment, riveting process, different steel plate surface treatment methods, ordinary cold plate surface electroplating, post-plating spraying treatment, phosphating spraying treatment, and cleaning, degreasing and spraying on the surface of the electroplated steel plate.

2. For riveting, consider the dies with different stud heights, and then adjust the pressure press to ensure the cleaning of the bolts and the surface of the workpiece, to avoid the bolts without pressure, or pushed beyond the surface of the workpiece, causing the workpiece to be scrapped. Welding, spot welding, carbon dioxide gas shielded welding, manual arc welding, and spot welding should first consider the mass production of welding stainless steel plate positioning tools to ensure the spot welding positioning accuracy of the workpiece.

3. Surface treatment of stainless steel sheet. During the spraying process, the requirements of the sprayed workpiece, the teeth after assembly or the holes required for the protection of the conductive holes can be checked to the soft glue sticks or screws in the threaded part, and the positioning protection of the required conductive protector positioning equipment should be pasted. heat resistant tape. Therefore, the nut (flanging) can be seen on the outer surface of the workpiece to avoid spraying (flanging) on the back of the perforation.

Product parameters: