Customized Electronic Box Enclosure Sheet Metal Processing​

In the profiling equipment, the design of the profiling shell is limited by many factors, and the process requirements are different.

Specifically, sheet metal parts, also known as sheet metal parts, are made of sheet metal parts and are boxes and enclosures used to store servers, computers, electrical appliances or other equipment, such as power cabinets, net cages, server cabinets, outdoor Cabinets and other equipment. The design of the sheet metal Enclosure shell should meet the basic process requirements of the steel shell;

Sheet metal Electronic processing steps:

1. Cutting material: according to the requirements of the product drawings, cut the plate on the CNC punching machine or other special shearing machine;

2. Drilling: Drill holes in the material with a drill bit of the corresponding specification;

3. Tapping (screen printing): rough machining the edge of the hole on the blank workpiece using the mold;

4. Edge milling (chamfering): Use the machine tool to finish the side wall of the workpiece to make it reach the required size and shape;

5. Planing (chamfering): Finish the four sides of the panel with a planer or a broaching machine;

6. Grinding: Use a grinder and a polishing machine to treat the surface of the panel to obtain a certain roughness and smoothness;

7. After cleaning and grinding, spray paint or electro-galvanized protective layer.

Product parameters: